On Tue, Feb 07, 2012 at 06:54:34PM +0800, Huang Shijie wrote:

Move the header to a more common place.
The mxs dma engine is not only used in mx23/mx28, but also used
in mx50/mx6q.  It will also be used in the future chips.

Rename it to mxs-dma.h

change mxs-dma driver, mxs-mmc driver, gpmi-nand driver, mxs-saif driver
to the new header file.

Signed-off-by: Huang Shijie <redacted>
---
 drivers/dma/mxs-dma.c                              |    2 +-
 drivers/mmc/host/mxs-mmc.c                         |    2 +-
 drivers/mtd/nand/gpmi-nand/gpmi-nand.h             |    2 +-
 .../include/mach/dma.h => include/linux/mxs-dma.h  |    0
 sound/soc/mxs/mxs-pcm.c                            |    2 +-
 sound/soc/mxs/mxs-pcm.h                            |    2 +-
 sound/soc/mxs/mxs-saif.c                           |    2 +-
 7 files changed, 6 insertions(+), 6 deletions(-)
 rename arch/arm/mach-mxs/include/mach/dma.h => include/linux/mxs-dma.h (100%)

I suggested you rename it include/linux/fsl/mxs-dma.h [1].  It seems
you are ignoring the comment.  Can you explain why it's not a
reasonable suggestion?

And Wolfram and Mark told you that you need to Cc subsystem maintainers
to collect their acks [2].  But you are still not Ccing Mark Brown and
Chris Ball for sound/soc/ and drivers/mmc changes.  So you are not
listening.

Regards,
Shawn

[1] http://article.gmane.org/gmane.linux.kernel.mmc/12301
[2] http://article.gmane.org/gmane.linux.alsa.devel/93751