[PATCH v4 - resend 10/13] ASoC: omap-abe-twl6040: Configure card according to platform data

On Wed, Jan 25, 2012 at 10:23:01AM +0200, Peter Ujfalusi wrote:

On 01/24/2012 03:00 PM, Mark Brown wrote:

quoted

On Tue, Jan 24, 2012 at 01:52:27PM +0200, Peter Ujfalusi wrote:

quoted

quoted

Disable the not connected pins on the board based on the
received platform data.
DO not register the jack function on boards, which does not have
means to detect it (jack is always connected).

quoted

This should no longer be needed with the auto not connected stuff.

The auto not connected checks if we have connected something in the card
domain to the codec's input/output/micbias widgets.
In the machine driver we start from fully wired configuration, and based
on the received platform data we mark certain connections not connected.
The audio nc feature would not work here. It will not mark anything nc
since the DAPM map is complete.

It'd do the right thing if you changed the code to only register the
board widgets and routes as required - from your reply to Jassi it looks
like you ought to do conditional reigstration anyway as the input paths
move around between board variations.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120125/954dbb26/attachment.sig>