[PATCH 1/2] ARM: OMAP3+: dpll: Configure autoidle mode only if its supported

On Thu, Jan 19, 2012 at 17:16:38, Bedia, Vaibhav wrote:

The current DPLL code enables and disables autoidle features
without checking whether the autoidle register is available.
Fix this by putting a check for the existence of the autoidle
register in the DPLL data.

With such a check in place, for DPLLs which do not support this
feature, simply skipping the autoidle_reg entry in the DPLL data
is sufficient.

Signed-off-by: Vaibhav Bedia <redacted>

There's no PATCH 2/2 here. Sorry about that. If needed, I can resend
this one.