[PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board
From: Maxime Ripard <hidden>
Date: 2012-01-16 21:36:26
Also in:
linux-iio
Subsystem:
arm port, arm/microchip (at91) soc support, the rest · Maintainers:
Russell King, Nicolas Ferre, Alexandre Belloni, Claudiu Beznea, Linus Torvalds
Signed-off-by: Maxime Ripard <redacted> Cc: Nicolas Ferre <redacted> Cc: Patrice Vilchez <redacted> Cc: Thomas Petazzoni <redacted> Cc: Jean-Christophe PLAGNIOL-VILLARD <redacted> --- arch/arm/mach-at91/at91sam9260_devices.c | 53 ++++++++++++++++++++++++++++++ arch/arm/mach-at91/board-sam9g20ek.c | 13 +++++++ 2 files changed, 66 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 39f81f4..3598540 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c@@ -16,6 +16,8 @@ #include <linux/platform_device.h> #include <linux/i2c-gpio.h> +#include <linux/platform_data/at91_adc.h> + #include <mach/board.h> #include <mach/gpio.h> #include <mach/cpu.h>
@@ -1312,6 +1314,57 @@ void __init at91_add_device_cf(struct at91_cf_data *data) void __init at91_add_device_cf(struct at91_cf_data * data) {} #endif +/* -------------------------------------------------------------------- + * ADCs + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_IIO_AT91_ADC) || defined(CONFIG_IIO_AT91_ADC_MODULE) +static struct at91_adc_data adc_data; + +static struct resource adc_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_ADC, + .end = AT91SAM9260_BASE_ADC + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_ADC, + .end = AT91SAM9260_ID_ADC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91_adc_device = { + .name = "at91_adc", + .id = -1, + .dev = { + .platform_data = &adc_data, + }, + .resource = adc_resources, + .num_resources = ARRAY_SIZE(adc_resources), +}; + +void __init at91_add_device_adc(struct at91_adc_data *data) +{ + if (!data) + return; + + if (test_bit(0, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PC0, 0); + if (test_bit(1, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PC1, 0); + if (test_bit(2, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PC2, 0); + if (test_bit(3, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PC3, 0); + + adc_data = *data; + platform_device_register(&at91_adc_device); +} +#else +void __init at91_add_device_adc(struct at91_adc_data *data) {} +#endif + /* -------------------------------------------------------------------- */ /* * These devices are always present and don't need any board-specific
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 817f59d..29dae9f 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c@@ -31,6 +31,8 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/consumer.h> +#include <linux/platform_data/at91_adc.h> + #include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h>
@@ -314,6 +316,15 @@ static void __init ek_add_device_buttons(void) static void __init ek_add_device_buttons(void) {} #endif +/* + * ADCs + */ + +static struct at91_adc_data ek_adc_data = { + .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3), + .vref = 3300, +}; + #if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) static struct regulator_consumer_supply ek_audio_consumer_supplies[] = { REGULATOR_SUPPLY("AVDD", "0-001b"),
@@ -389,6 +400,8 @@ static void __init ek_board_init(void) ek_add_device_gpio_leds(); /* Push Buttons */ ek_add_device_buttons(); + /* ADCs */ + at91_add_device_adc(&ek_adc_data); /* PCK0 provides MCLK to the WM8731 */ at91_set_B_periph(AT91_PIN_PC1, 0); /* SSC (for WM8731) */
--
1.7.5.4