[PATCH v2 06/10] arm/dts: OMAP3: Add i2c controller nodes
From: Grant Likely <hidden>
Date: 2012-01-04 18:14:00
Also in:
linux-devicetree, linux-omap
On Fri, Dec 09, 2011 at 03:02:37PM +0100, Benoit Cousson wrote:
Add i2c controllers nodes into the main ocp bus. Signed-off-by: Benoit Cousson <redacted> Cc: Grant Likely <redacted> Cc: Rob Herring <redacted>
Acked-by: Grant Likely <redacted>
quoted hunk
--- arch/arm/boot/dts/omap3.dtsi | 28 ++++++++++++++++++++++++++++ 1 files changed, 28 insertions(+), 0 deletions(-)diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 6866dc7..81d8e2c 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi@@ -61,5 +61,33 @@ ti,intc-size = <96>; reg = <0x48200000 0x1000>; }; + + /* + * Flags for all i2c instances: 0x118 + * APPLY_ERRATA_I207 | RESET_REGS_POSTIDLE | BUS_SHIFT_2 + */ + i2c1: i2c at 1 { + compatible = "ti,omap3-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + ti,flags = <0x118>; + }; + + i2c2: i2c at 2 { + compatible = "ti,omap3-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + ti,flags = <0x118>; + }; + + i2c3: i2c at 3 { + compatible = "ti,omap3-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; + ti,flags = <0x118>; + }; }; };-- 1.7.0.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel at lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel