Thread (19 messages) 19 messages, 5 authors, 2011-12-16

[PATCH v3 0/4] OMAP serial device tree support

From: tony@atomide.com (Tony Lindgren)
Date: 2011-12-16 22:09:47
Also in: linux-devicetree, linux-omap, linux-serial

* Rob Herring [off-list ref] [111216 13:30]:
Tony,

On 12/16/2011 03:57 PM, Tony Lindgren wrote:
quoted
Rob,

* Rob Herring [off-list ref] [111214 05:16]:
quoted
On 12/14/2011 05:55 AM, Rajendra Nayak wrote:
quoted
v3 is rebased on top of the latest serial runtime
patches[1] and boot tested with/without DT on OMAP4
SDP and OMAP4 Panda boards.

Patches can be found here..
git://gitorious.org/omap-pm/linux.git for-dt/serial

I also had to pull in a fix[2] for DT testing (already in linux-omap
master) which was missing as the serial runtime branch[1]
was based on an older master commit.

Changes in v3:
-1- Rebased on latest serial runtime patches
-2- Minor typr fixes

Changes in v2:
-1- Got rid of binding to define which uart is console
-2- Added checks to default clock speed to 48Mhz
-3- Added compatible for each OMAP family
-4- Used of_alias_get_id to populate port.line

[1] git://gitorious.org/runtime_3-0/runtime_3-0.git for_3_3/lo_rc4_uartruntime
[2] http://www.spinics.net/lists/arm-kernel/msg150751.html

Rajendra Nayak (4):
  omap-serial: Get rid of all pdev->id usage
  omap-serial: Use default clock speed (48Mhz) if not specified
  omap-serial: Add minimal device tree support
  ARM: omap: pass minimal SoC/board data for UART from dt

 .../devicetree/bindings/serial/omap_serial.txt     |   10 +++
 arch/arm/boot/dts/omap3.dtsi                       |   31 ++++++++
 arch/arm/boot/dts/omap4.dtsi                       |   28 +++++++
 arch/arm/mach-omap2/board-generic.c                |    1 -
 drivers/tty/serial/omap-serial.c                   |   80 +++++++++++++++----
 5 files changed, 132 insertions(+), 18 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/serial/omap_serial.txt
Looks good. For the series:

Reviewed-by: Rob Herring <redacted>
Care to check if your Reviewed-by can also be applied
to the additional patch "[PATCH] arm/dts: Add minimal device
tree support for omap2420 and omap2430" that's needed
to keep serial port working for omap2 with this series?
It looks fine.
OK thanks.

Tony
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help