Thread (43 messages) 43 messages, 5 authors, 2012-01-02

[PATCH 9/9] ARM: highbank: add interrupt properties to gpio nodes

From: Grant Likely <hidden>
Date: 2011-12-14 21:40:15
Also in: linux-devicetree, lkml

On Wed, Dec 14, 2011 at 8:28 AM, Rob Herring [off-list ref] wrote:
From: Rob Herring <redacted>

Add interrupt-controller properties to pl061 gpio nodes so gpio lines can
function as interrupts.

Signed-off-by: Rob Herring <redacted>
Acked-by: Grant Likely <redacted>
quoted hunk ↗ jump to hunk
---
?arch/arm/boot/dts/highbank.dts | ? ?9 ++++++++-
?1 files changed, 8 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index aeb1a75..dfe2b49 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -89,7 +89,6 @@
? ? ? ? ? ? ? ? ? ? ? ?#size-cells = <0>;
? ? ? ? ? ? ? ? ? ? ? ?#address-cells = <1>;
? ? ? ? ? ? ? ? ? ? ? ?interrupt-controller;
- ? ? ? ? ? ? ? ? ? ? ? interrupt-parent;
? ? ? ? ? ? ? ? ? ? ? ?reg = <0xfff11000 0x1000>,
? ? ? ? ? ? ? ? ? ? ? ? ? ? ?<0xfff10100 0x100>;
? ? ? ? ? ? ? ?};
@@ -129,6 +128,8 @@
? ? ? ? ? ? ? ? ? ? ? ?#gpio-cells = <2>;
? ? ? ? ? ? ? ? ? ? ? ?compatible = "arm,pl061", "arm,primecell";
? ? ? ? ? ? ? ? ? ? ? ?gpio-controller;
+ ? ? ? ? ? ? ? ? ? ? ? interrupt-controller;
+ ? ? ? ? ? ? ? ? ? ? ? #interrupt-cells = <2>;
? ? ? ? ? ? ? ? ? ? ? ?reg = <0xfff30000 0x1000>;
? ? ? ? ? ? ? ? ? ? ? ?interrupts = <0 14 4>;
? ? ? ? ? ? ? ?};
@@ -137,6 +138,8 @@
? ? ? ? ? ? ? ? ? ? ? ?#gpio-cells = <2>;
? ? ? ? ? ? ? ? ? ? ? ?compatible = "arm,pl061", "arm,primecell";
? ? ? ? ? ? ? ? ? ? ? ?gpio-controller;
+ ? ? ? ? ? ? ? ? ? ? ? interrupt-controller;
+ ? ? ? ? ? ? ? ? ? ? ? #interrupt-cells = <2>;
? ? ? ? ? ? ? ? ? ? ? ?reg = <0xfff31000 0x1000>;
? ? ? ? ? ? ? ? ? ? ? ?interrupts = <0 15 4>;
? ? ? ? ? ? ? ?};
@@ -145,6 +148,8 @@
? ? ? ? ? ? ? ? ? ? ? ?#gpio-cells = <2>;
? ? ? ? ? ? ? ? ? ? ? ?compatible = "arm,pl061", "arm,primecell";
? ? ? ? ? ? ? ? ? ? ? ?gpio-controller;
+ ? ? ? ? ? ? ? ? ? ? ? interrupt-controller;
+ ? ? ? ? ? ? ? ? ? ? ? #interrupt-cells = <2>;
? ? ? ? ? ? ? ? ? ? ? ?reg = <0xfff32000 0x1000>;
? ? ? ? ? ? ? ? ? ? ? ?interrupts = <0 16 4>;
? ? ? ? ? ? ? ?};
@@ -153,6 +158,8 @@
? ? ? ? ? ? ? ? ? ? ? ?#gpio-cells = <2>;
? ? ? ? ? ? ? ? ? ? ? ?compatible = "arm,pl061", "arm,primecell";
? ? ? ? ? ? ? ? ? ? ? ?gpio-controller;
+ ? ? ? ? ? ? ? ? ? ? ? interrupt-controller;
+ ? ? ? ? ? ? ? ? ? ? ? #interrupt-cells = <2>;
? ? ? ? ? ? ? ? ? ? ? ?reg = <0xfff33000 0x1000>;
? ? ? ? ? ? ? ? ? ? ? ?interrupts = <0 17 4>;
? ? ? ? ? ? ? ?};
--
1.7.5.4


-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help