[PATCH 09/19] clock-imx35: fix reboot in internal boot modeg

From
Eric Bénard <hidden>
Date
2011-12-13 13:48:01
Also in
lkml
Reply to
Sascha Hauer, 2011-12-13
Le 13/12/2011 11:00, Sascha Hauer a ?crit :
On Tue, Dec 13, 2011 at 07:31:41AM +0100, Eric B?nard wrote:
quoted
commit 8d75a2620dc3e33ce504044c375c443ed7ed4128 disable IIM
clock after reading silicon revision which will prevent
reboot in internal boot mode (see comment a few line before)
I'm a bit unsure. The fix you suggest is the least intrusive, but
a proper fix would be to move the mentioned block below the
imx_print_silicon_rev, like this:

	clk_enable(&iim_clk);
	imx_print_silicon_rev("i.MX35", mx35_revision());
	clk_disable(&iim_clk);

	/*
	 * Check if we came up in internal boot mode. If yes, we need
	 * some
	 * extra clocks turned on, otherwise the MX35 boot ROM code will
	 * hang after a watchdog reset.
	 */
	if (!(__raw_readl(CCM_BASE + CCM_RCSR)&  (3<<  10))) {
		clk_enable(&iim_clk);
		clk_enable(&uart1_clk);
		clk_enable(&scc_clk);
	}

This would also get the clk enable counters right.
OK that's cleaner.
While fixing the patch it seems comment & code are not synced as scc_clk is 
0x3 << 2 and the code was setting 0x3 << 4 which corresponds to sdma_clk (and 
in my configuration, reboot works without any of these clocks forced). I chose 
to have code synced with comment for v2 of the patch.

Eric
Thread (42 messages) 42 messages, 9 authors, last reply 2011-12-23
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help