On 11/29/2011 07:32 PM, Stephen Warren wrote:
quoted hunk
Fix the DT binding documentation to describe interrupt-related properties,
and the contents of "child" node interrupts property.
Update tegra20.dtsi to specify the required interrupt-related properties.
Fix the driver to creating an IRQ domain for itself, so that child node
interrupts properties are correctly parsed.
Signed-off-by: Stephen Warren <redacted>
---
This patch depends on "arm/tegra: convert tegra20 to GIC devicetree binding",
at least for context, and probably functionally (and of course patch 1 in
this series).
I've tested that this patch causes the WM8903 to receive a valid IRQ when
instantiated from device-tree (although the patches to instantiate the
WM8903 from DT are local to me for now).
.../devicetree/bindings/gpio/gpio_nvidia.txt | 10 ++++++++++
arch/arm/boot/dts/tegra20.dtsi | 2 ++
drivers/gpio/gpio-tegra.c | 4 ++++
3 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
index eb4b530..ecdf19c 100644
--- a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
@@ -6,3 +6,13 @@ Required properties:
second cell is used to specify optional parameters:
- bit 0 specifies polarity (0 for normal, 1 for inverted)
- gpio-controller : Marks the device node as a GPIO controller.
+- #interrupt-cells : Should be 3.
Should be 2??
quoted hunk
+ The first cell is the GPIO number.
+ The second cell is used to specify flags:
+ bits[3:0] trigger type and level flags:
+ 1 = low-to-high edge triggered.
+ 2 = high-to-low edge triggered.
+ 4 = active high level-sensitive.
+ 8 = active low level-sensitive.
+ Valid combinations are 1, 2, 3, 4, 8.
+- interrupt-controller : Marks the device node as an interrupt controller.
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index db6f562..e25f4a6 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -79,6 +79,8 @@
0 55 0x04
0 87 0x04
0 89 0x04 >;
+ interrupt-controller;
+ #interrupt-cells = <2>;
#gpio-cells = <2>;
gpio-controller;
};
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index 61044c8..26b0c85 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -25,6 +25,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/module.h>
+#include <linux/irqdomain.h>
#include <asm/mach/irq.h>
@@ -410,6 +411,9 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev)
spin_lock_init(&bank->lvl_lock[j]);
}
+ if (pdev->dev.of_node)
+ irq_domain_add_simple(pdev->dev.of_node, TEGRA_GPIO_TO_IRQ(0));
+
This is a bit of a temporary solution. Really, you want to end up with
something like this to eliminate INT_GPIO_BASE and dynamically assign
the irqbase:
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index 61044c8..a146a20 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -139,7 +139,7 @@ static int tegra_gpio_direction_output(struct
gpio_chip *chip, unsigned offset,
static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
- return TEGRA_GPIO_TO_IRQ(offset);
+ return irq_domain_to_irq(chip->domain, offset);
quoted
quoted
This is a bit wrong. You need a tegra_gpio_chip containing a domain
and gpio_chip.
}
static struct gpio_chip tegra_gpio_chip = {@@ -155,28 +155,28 @@ static struct gpio_chip tegra_gpio_chip = {
static void tegra_gpio_irq_ack(struct irq_data *d)
{
- int gpio = d->irq - INT_GPIO_BASE;
+ int gpio = d->hwirq;
tegra_gpio_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio));
}
static void tegra_gpio_irq_mask(struct irq_data *d)
{
- int gpio = d->irq - INT_GPIO_BASE;
+ int gpio = d->hwirq;
tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 0);
}
static void tegra_gpio_irq_unmask(struct irq_data *d)
{
- int gpio = d->irq - INT_GPIO_BASE;
+ int gpio = d->hwirq;
tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 1);
}
static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type)
{
- int gpio = d->irq - INT_GPIO_BASE;
+ int gpio = d->hwirq;
struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d);
int port = GPIO_PORT(gpio);
int lvl_type;@@ -385,6 +385,7 @@ static int __devinit tegra_gpio_probe(struct
platform_device *pdev)
tegra_gpio_chip.of_node = pdev->dev.of_node;
#endif
+ domain.irq_base = irq_alloc_descs(...)
gpiochip_add(&tegra_gpio_chip);
for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) {
Rob