[PATCH 2/3] staging: nvec: add device tree support
From: marvin24@gmx.de (Marc Dietrich)
Date: 2011-10-31 19:58:54
Also in:
linux-tegra
Subsystem:
open firmware and flattened device tree bindings, staging - nvidia compliant embedded controller interface (nvec), staging subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Marc Dietrich, Greg Kroah-Hartman, Linus Torvalds
This adds device tree support to the nvec driver. By using this method it is no longer necessary to specify platform data through a board file. Cc: devel at driverdev.osuosl.org Cc: Greg KH <gregkh@suse.de> Cc: Julian Andres Klode <redacted> Cc: Grant Likely <redacted> Signed-off-by: Marc Dietrich <marvin24@gmx.de> --- .../devicetree/bindings/nvec/nvec_nvidia.txt | 9 +++++ drivers/staging/nvec/nvec.c | 35 ++++++++++++++++++- 2 files changed, 42 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/nvec/nvec_nvidia.txt
diff --git a/Documentation/devicetree/bindings/nvec/nvec_nvidia.txt b/Documentation/devicetree/bindings/nvec/nvec_nvidia.txt
new file mode 100644
index 0000000..5aeee53
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvec/nvec_nvidia.txt@@ -0,0 +1,9 @@ +NVIDIA compliant embedded controller + +Required properties: +- compatible : should be "nvidia,nvec". +- reg : the iomem of the i2c slave controller +- interrupts : the interrupt line of the i2c slave controller +- clock-frequency : the frequency of the i2c bus +- gpios : the gpio used for ec request +- slave-addr: the i2c address of the slave controller
diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c
index e06b867..ffb73c0 100644
--- a/drivers/staging/nvec/nvec.c
+++ b/drivers/staging/nvec/nvec.c@@ -27,6 +27,8 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/of.h> +#include <linux/of_gpio.h> #include <linux/list.h> #include <linux/mfd/core.h> #include <linux/mutex.h>
@@ -36,6 +38,8 @@ #include <linux/spinlock.h> #include <linux/workqueue.h> +#include <asm/byteorder.h> + #include <mach/clk.h> #include <mach/iomap.h>
@@ -719,6 +723,7 @@ static int __devinit tegra_nvec_probe(struct platform_device *pdev) struct resource *res; struct resource *iomem; void __iomem *base; + const unsigned int *prop; nvec = kzalloc(sizeof(struct nvec_chip), GFP_KERNEL); if (nvec == NULL) {
@@ -727,8 +732,26 @@ static int __devinit tegra_nvec_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, nvec); nvec->dev = &pdev->dev; - nvec->gpio = pdata->gpio; - nvec->i2c_addr = pdata->i2c_addr; + + if (pdata) { + nvec->gpio = pdata->gpio; + nvec->i2c_addr = pdata->i2c_addr; + } else if (nvec->dev->of_node) { + nvec->gpio = of_get_named_gpio(nvec->dev->of_node, "request-gpios", 0); + if (nvec->gpio < 0) { + dev_err(&pdev->dev, "no gpio specified"); + goto failed; + } + prop = of_get_property(nvec->dev->of_node, "slave-addr", NULL); + if (!prop) { + dev_err(&pdev->dev, "no i2c address specified"); + goto failed; + } + nvec->i2c_addr = be32_to_cpup(prop); + } else { + dev_err(&pdev->dev, "no platform data\n"); + goto failed; + } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) {
@@ -893,6 +916,13 @@ static int tegra_nvec_resume(struct platform_device *pdev) #define tegra_nvec_resume NULL #endif +/* Match table for of_platform binding */ +static const struct of_device_id nvidia_nvec_of_match[] __devinitconst = { + { .compatible = "nvidia,nvec", }, + {}, +}; +MODULE_DEVICE_TABLE(of, nvidia_nvec_of_match); + static struct platform_driver nvec_device_driver = { .probe = tegra_nvec_probe, .remove = __devexit_p(tegra_nvec_remove),
@@ -901,6 +931,7 @@ static struct platform_driver nvec_device_driver = { .driver = { .name = "nvec", .owner = THIS_MODULE, + .of_match_table = nvidia_nvec_of_match, } };
--
1.7.5.4