[PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms

On Thu, Sep 22, 2011 at 5:30 PM, Hector Oron [off-list ref] wrote:

Hello,

?Apologies for late reply.

2011/9/6 Eric Miao [off-list ref]:

quoted

On Tue, Sep 6, 2011 at 1:46 AM, Hector Oron [off-list ref] wrote:

quoted

2011/9/1 Richard Zhu [off-list ref]:

quoted

quoted

Here is my complete dmesg. The system seems to work fine, it is a
1.0TB WD10TPVT SATA disk in a case which provides eSATA and connected
to mx53 LOCO with eSATA-to-SATA cable.

quoted

Is it possible that it's caused by this converter? Do you have a separate
SATA power supply that could help test the disk directly connected to
mx53loco?

I think I had a bad configuration setup for my kernel. I have rebuilt
3.1.0-rc6 from Sascha's master git with this patches and now SATA is
working properly I do not see any issue as I did. So, from my side all
is OK now, and I assume I had some missing or conflicting module
setup.

Kind regards and apologies for inconveniences,

That's great, Herton. Can we take it as a Tested-by?

--
?H?ctor Or?n ?-.. . -... .. .- -. ? -.. . ...- . .-.. --- .--. . .-.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel