[V8 PATCH 5/5] MX53 Enable the AHCI SATA on MX53 SMD board
From: festevam@gmail.com (Fabio Estevam)
Date: 2011-09-22 10:36:41
Also in:
linux-ide
On Thu, Sep 22, 2011 at 7:14 AM, Richard Zhu [off-list ref] wrote:
quoted hunk ↗ jump to hunk
Signed-off-by: Richard Zhu <redacted> --- ?arch/arm/mach-mx5/board-mx53_smd.c | ? 16 ++++++++++++++++ ?1 files changed, 16 insertions(+), 0 deletions(-)diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index bc02894..9d06fbe 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c@@ -35,6 +35,7 @@?#include "devices-imx53.h" ?#define SMD_FEC_PHY_RST ? ? ? ? ? ? ? ?IMX_GPIO_NR(7, 6) +#define MX53_SMD_SATA_PWR_EN ? ?IMX_GPIO_NR(3, 3) ?static iomux_v3_cfg_t mx53_smd_pads[] = { ? ? ? ?MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,@@ -111,6 +112,19 @@ static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {? ? ? ?.bitrate = 100000, ?}; +static inline void mx53_smd_ahci_pwr_on(void) +{ + ? ? ? int ret; + + ? ? ? /* Enable SATA PWR */ + ? ? ? ret = gpio_request(MX53_SMD_SATA_PWR_EN, "ahci-sata-pwr");
Please use gpio_request_one.
+ ? ? ? if (ret) {
+ ? ? ? ? ? ? ? printk(KERN_ERR "failed to get SATA_PWR_EN: %d\n", ret);You can use pr_err instead. Regards, Fabio Estevam