Thread (9 messages) 9 messages, 3 authors, 2011-09-21
DORMANTno replies
Revisions (2)
  1. v1 [diff vs current]
  2. v5 current

[PATCH V5 0/6] ARM: S5P64X0: Add Framebuffer support

From: Ajay kumar <hidden>
Date: 2011-09-21 13:00:40
Also in: linux-samsung-soc

Hi Kukjin,

On Wed, Sep 21, 2011 at 5:43 PM, Kukjin Kim [off-list ref] wrote:
Ajay Kumar wrote:
quoted
?The patches are created against "for-next" branch of Kukjin Kim's tree
at:
quoted
?git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git

?Changes since V1:
? ? ? - Remove mach/regs-fb.h, instead use plat/regs-fb.h.
? ? ? - Add common pdata for FB and LCD in SMDK6440 and SMDK6450.
? ? ? - Modify names(s5p-->smdk), max_bpp and refresh rate.
? ? ? - Modify variable name(cfg-->chipid).
? ? ? - Use __raw_readl, __raw_writel instead of readl and writel.

?Changes since V2:
? ? ? -Change name of the config-COMMON_FB to SMDK64X0_COMMON_FB.
? ? ? -Change filename common-fb.h to smdk64x0-common-fb.h.
? ? ? -Change filename common-fb.c to smdk64x0-common-fb.c.

?Changes since V3:
? ? ? -Add FB and LCD plat-data in corresponding machine files
? ? ? ?instead of creating common file smdk64x0-common-fb.c.
? ? ? -Modify name S5P64X0_SETUP_FB to S5P64X0_SETUP_FB_24BPP.
? ? ? -Modify file name setup-fb.c to setup-fb-24bpp.c.
? ? ? -Move SPCON settings to machine file.
? ? ? -Use soc_is_s5p6440()/soc_is_s5p6450() to check CPU ID.

?Changes since V4:
? ? ? -Removed refresh rate from plat data(s3c_fb_pd_win)
? ? ? -Fixed complation warning:"function declaration isn't a prototype"
? ? ? ?for s5p6440_set_lcd_interface() and s5p6450_set_lcd_interface().


? These patches have dependency on the patch:
? "ARM: S5P64X0: Fix mask value for S5P64X0 CPU IDs",
? at http://www.spinics.net/lists/arm-kernel/msg138990.html

o To Kukjin,
? [PATCH RESEND V5 1/6] video: s3c-fb: Add S5P64X0 specific
s3c_fb_driverdata
? [PATCH RESEND V5 2/6] ARM: S5P64X0: Add register base and IRQ for
Framebuffer
? [PATCH RESEND V5 3/6] ARM: S5P64X0: Set s3c_device_fb name
? [PATCH RESEND V5 4/6] ARM: S5P64X0: Add GPIO setup for LCD
? [PATCH V5 5/6]ARM: S5P6440: Add LCD-LTE480 and enable Framebuffer
support
? [PATCH V5 6/6]ARM: S5P6450: Add LCD-LTE480 and enable Framebuffer
support

?arch/arm/mach-s5p64x0/Kconfig ? ? ? ? ? ? ? ? ?| ? 10 +++
?arch/arm/mach-s5p64x0/Makefile ? ? ? ? ? ? ? ? | ? ?1 +
?arch/arm/mach-s5p64x0/cpu.c ? ? ? ? ? ? ? ? ? ?| ? ?3 +
?arch/arm/mach-s5p64x0/include/mach/irqs.h ? ? ?| ? ?4 +
?arch/arm/mach-s5p64x0/include/mach/map.h ? ? ? | ? ?3 +
?arch/arm/mach-s5p64x0/include/mach/regs-gpio.h | ? ?4 +
?arch/arm/mach-s5p64x0/mach-smdk6440.c ? ? ? ? ?| ? 74
+++++++++++++++++++++++
?arch/arm/mach-s5p64x0/mach-smdk6450.c ? ? ? ? ?| ? 75
++++++++++++++++++++++++
?arch/arm/mach-s5p64x0/setup-fb-24bpp.c ? ? ? ? | ? 29 +++++++++
?arch/arm/plat-samsung/include/plat/fb.h ? ? ? ?| ? ?7 ++
?drivers/video/s3c-fb.c ? ? ? ? ? ? ? ? ? ? ? ? | ? 27 +++++++++
?11 files changed, 237 insertions(+), 0 deletions(-)
?create mode 100644 arch/arm/mach-s5p64x0/setup-fb-24bpp.c
Looks ok to me, will apply.

But as I said, the 'video: s3c-fb: Add S5P64X0 specific s3c_fb_driverdata'
should be sent to Florian's tree.
Yes. This patch was submitted to fbdev mailing list and Florian has
already accepted it. Here is the link:
http://lists.infradead.org/pipermail/linux-arm-kernel/2011-September/065154.html
I think, it's enough to re-send it to Florian Tobias Schandina.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim [off-list ref], Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at ?http://vger.kernel.org/majordomo-info.html
Ajay
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help