[PATCH v6 23/25] gpio/omap: enable irq at the end of all configuration in restore

Tarun Kanti DebBarma [off-list ref] writes:

From: Nishanth Menon <nm@ti.com>

Setup the interrupt enable registers only after we have configured the
required edge and required configurations, not before, to prevent
spurious events as part of restore routine.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tarun Kanti DebBarma <redacted>
Reviewed-by: Santosh Shilimkar <redacted>

Good catch Nishanth.

Kevin