[PATCH] ARM: vexpress: initial device tree support

On Wed, Sep 21, 2011 at 11:37:54AM -0500, Rob Herring wrote:

On 09/21/2011 09:57 AM, Grant Likely wrote:

quoted

On Wed, Sep 21, 2011 at 7:24 AM, Rob Herring [off-list ref] wrote:

quoted

On 09/21/2011 04:19 AM, Dave Martin wrote:

quoted

      * arm,amba-bus -- widely used by other boards and patchsets, but
        seems not to be documented.

This should be dropped. There's not really any bus component to an amba
bus. All the probing info is within the primecell peripherals.

No, if it is an AMBA bus, then it is entirely appropriate to declare
it as an amba bus, but to also be compatible with "simple-bus".  In
fact, it would be better to use a compatible string that specifies the
specific implementation of AMBA bus since there are several versions
of the spec.

And type of AMBA bus as the spec includes AXI, AHB, and APB. None of
which have any sort of programmability or software view.

If this is required, then the policy should be simple-bus should never
be allowed alone as every bus has some underlying type. Seems like
overkill for buses like this.

The key question is _where_ to draw the line between generic and specific.
By definition, the DT can never be a comprehensive description of the
hardware -- rather a good DT is a description of those details of the hardware
which could relevant to any hypothetical OS.

The flipside is that details which were thought to be irrelevant at
design/implementation time can turn out to be relevant in practice, due
to errata and implementation issues etc.  So taking the description slightly
beyond what the OS needs to know can still have some merit.


I still don't know how to say where the line should be drawn in this particular
case though.

Cheers
---Dave