Thread (14 messages) 14 messages, 4 authors, 2011-09-27

[PATCH 2/5] [media] v4l: Add mt9t111 sensor driver

From: Ravi, Deepthy <hidden>
Date: 2011-09-27 14:08:44
Also in: linux-media, linux-omap, lkml

Hi,
________________________________________
From: Gary Thomas [gary at mlbassoc.com]
Sent: Tuesday, September 27, 2011 7:21 PM
To: Ravi, Deepthy
Cc: laurent.pinchart at ideasonboard.com; mchehab at infradead.org; tony at atomide.com; Hiremath, Vaibhav; linux-media at vger.kernel.org; linux at arm.linux.org.uk; linux-arm-kernel at lists.infradead.org; kyungmin.park at samsung.com; hverkuil at xs4all.nl; m.szyprowski at samsung.com; g.liakhovetski at gmx.de; Shilimkar, Santosh; khilman at deeprootsystems.com; linux-kernel at vger.kernel.org; linux-omap at vger.kernel.org
Subject: Re: [PATCH v2 0/5] OMAP3EVM: Add support for MT9T111 sensor

On 2011-09-27 07:40, Deepthy Ravi wrote:
quoted
This patchset
      -adds support for MT9T111 sensor on omap3evm.
      Currently the sensor driver supports only
      VGA resolution.
      -enables MT9T111 sensor in omap2plus_defconfig.

This is dependent on the following patchset
http://www.spinics.net/lists/linux-media/msg37270.html
which adds YUYV input support for OMAP3ISP. And is
applied on top of rc1-for-3.2 of gliakhovetski/v4l-dvb.git
Why not use the same base as Lennart?
  The set is based on
  http://git.linuxtv.org/pinchartl/media.git/shortlog/refs/heads/omap3isp-omap3isp-next
[Deepthy Ravi] Because the patches for making mt9t112 driver usable outside the soc-camera subsystem are present in that base only . Its not there in Laurent's.
quoted
---
Changes in v2:
      As per the discussion here,
      https://lkml.org/lkml/2011/9/20/280
      the existing mt9t112 driver is reused for
      adding support for mt9t111 sensor.
Deepthy Ravi (3):
   [media] v4l: Add support for mt9t111 sensor driver
   ispccdc: Configure CCDC_SYN_MODE register
   omap2plus_defconfig: Enable omap3isp and MT9T111 sensor drivers

Vaibhav Hiremath (2):
   omap3evm: Enable regulators for camera interface
   omap3evm: Add Camera board init/hookup file

  arch/arm/configs/omap2plus_defconfig        |    9 +
  arch/arm/mach-omap2/Makefile                |    5 +
  arch/arm/mach-omap2/board-omap3evm-camera.c |  185 ++++
  arch/arm/mach-omap2/board-omap3evm.c        |   26 +
  drivers/media/video/Kconfig                 |    7 +
  drivers/media/video/Makefile                |    1 +
  drivers/media/video/mt9t111_reg.h           | 1367 +++++++++++++++++++++++++++
  drivers/media/video/mt9t112.c               |  320 ++++++-
  drivers/media/video/omap3isp/ispccdc.c      |   11 +-
  include/media/mt9t111.h                     |   45 +
  10 files changed, 1937 insertions(+), 39 deletions(-)
  create mode 100644 arch/arm/mach-omap2/board-omap3evm-camera.c
  create mode 100644 drivers/media/video/mt9t111_reg.h
  create mode 100644 include/media/mt9t111.h
--
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help