[PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28
From: Koen Beel <hidden>
Date: 2011-08-03 12:00:26
Hi, On Wed, Aug 3, 2011 at 12:37 PM, Wolfram Sang [off-list ref] wrote:
quoted
quoted
Do you have an SD card in the system? I'm getting the same error when accessing an SD card. Without SD card I can use the flash without any errors.No SD card in the system. At least not on my mx23evk board. My real target hardware has a SDIO wifi chip.Removing the SD didn't help here as well. Koen, which bootloader do you use?
i'm using uboot in nand flash. (build an sb file containing power_prep, boot_prep and uboot en flashed to nand using kobs-ng tool) In my setup uboot loads a uImage from tftp. This uImage contains the full rootfs as initramfs. So no need for mmc, nfs or nand. If someone would like to try using my uImage for mx23evk, you can download it here: https://www.transferbigfiles.com/025d4f2a-38da-266a-66d1-1d7a05b1b938?rid=J3Qh9b7Vb1ORXFtzU589fw%3d%3d Regards, Koen
-- Pengutronix e.K. ? ? ? ? ? ? ? ? ? ? ? ? ? | Wolfram Sang ? ? ? ? ? ? ? ?| Industrial Linux Solutions ? ? ? ? ? ? ? ? | http://www.pengutronix.de/ ?| -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) iEYEARECAAYFAk45JNYACgkQD27XaX1/VRt1hACdFt1CQltiTWSwcoaNXsmJqkS0 ycQAn3oPqxZYK/wmtd5S9Gh5dj+5YM73 =jJs2 -----END PGP SIGNATURE-----