[RFC PATCH v10 4/4] ARM: gic: add compute_irqnr macro for exynos4
From: Marc Zyngier <hidden>
Date: 2011-08-01 17:04:20
Subsystem:
arm port, the rest · Maintainers:
Russell King, Linus Torvalds
exynos4 has a full copy of entry-macro-gic.S, just for the sake of an offset added to the IRQ number read from the GIC. Add a compute_irqnr macro to entry-macro-gic.S so that any platform can add it's own hook without having to copy the whole file again. Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <redacted> Signed-off-by: Marc Zyngier <redacted> --- arch/arm/include/asm/hardware/entry-macro-gic.S | 3 + arch/arm/mach-exynos4/include/mach/entry-macro.S | 57 +++------------------- 2 files changed, 10 insertions(+), 50 deletions(-)
diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S
index 74ebc80..fbb50dc 100644
--- a/arch/arm/include/asm/hardware/entry-macro-gic.S
+++ b/arch/arm/include/asm/hardware/entry-macro-gic.S@@ -43,6 +43,9 @@ cmpcc \irqnr, \irqnr cmpne \irqnr, \tmp cmpcs \irqnr, \irqnr +#ifdef HAVE_GIC_BASE_OFFSET + compute_irqnr \irqnr, \tmp +#endif .endm /* We assume that irqstat (the raw value of the IRQ acknowledge
diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S
index 807d05d..ea578b5 100644
--- a/arch/arm/mach-exynos4/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S@@ -9,11 +9,15 @@ * warranty of any kind, whether express or implied. */ +#define HAVE_GIC_BASE_OFFSET 1 + #include <mach/hardware.h> #include <mach/map.h> #include <asm/hardware/gic.h> +#include <asm/hardware/entry-macro-gic.S> - .macro disable_fiq + .macro compute_irqnr, irqnr, tmp + addne \irqnr, #32 .endm .macro get_irqnr_preamble, base, tmp
@@ -23,57 +27,10 @@ and \tmp, \tmp, #3 cmp \tmp, #1 addeq \base, \base, #EXYNOS4_GIC_BANK_OFFSET - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - /* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * For now, we ignore all local interrupts so only return an interrupt if it's - * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. - * - * A simple read from the controller will tell us the number of the highest - * priority enabled interrupt. We then just need to check whether it is in the - * valid range for an IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ - - ldr \tmp, =1021 - - bic \irqnr, \irqstat, #0x1c00 - - cmp \irqnr, #15 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - addne \irqnr, \irqnr, #32 + .macro disable_fiq .endm - /* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt on the - * controller, since this requires the original irqstat value which - * we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr + .macro arch_ret_to_user, tmp1, tmp2 .endm
--
1.7.0.4