[PATCH V3 06/20] dmaengine/amba-pl08x: Remove redundant comment and rewrite original
From: Viresh Kumar <hidden>
Date: 2011-08-05 10:05:46
Also in:
lkml
Subsystem:
dma generic offload engine subsystem, the rest · Maintainers:
Vinod Koul, Linus Torvalds
Similar comment is present over routine also pl08x_choose_master_bus(). Keeping one of them. Also rewrite that comment to convey message clearly. Signed-off-by: Viresh Kumar <redacted> --- drivers/dma/amba-pl08x.c | 15 +++++++-------- 1 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 01c2f50..6c52959 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c@@ -497,9 +497,13 @@ struct pl08x_lli_build_data { }; /* - * Autoselect a master bus to use for the transfer this prefers the - * destination bus if both available if fixed address on one bus the - * other will be chosen + * Autoselect a master bus to use for the transfer. Slave will be the chosen as + * victim in case src & dest are not similarly aligned. i.e. If after aligning + * masters address with width requirements of transfer (by sending few byte by + * byte data), slave is still not aligned, then its width will be reduced to + * BYTE. + * - prefers the destination bus if both available + * - if fixed address on one bus the other will be chosen */ static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd, struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl)
@@ -625,11 +629,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* We need to count this down to zero */ bd.remainder = txd->len; - /* - * Choose bus to align to - * - prefers destination bus if both available - * - if fixed address on one bus chooses other - */ pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl); dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu llimax=%zu\n",
--
1.7.2.2