[PATCH v6 2/4] ARM: mxs: add new a pad control
flat view
STALE5577d
SUPERSEDED
From: Uwe Kleine-König <hidden>
Date: 2011-07-08 07:23:59
Revision v6 of 5 in this series.
Revisions (5)
- v6
- v6 current
- v6
- v7 [diff vs current]
- v8 [diff vs current]
On Fri, Jul 08, 2011 at 01:28:03PM +0800, Huang Shijie wrote:
quoted hunk ↗ jump to hunk
add a new pad control which is used in some rare cases, such as gpmi-nand device. Signed-off-by: Huang Shijie <redacted> --- arch/arm/mach-mxs/include/mach/iomux.h | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)diff --git a/arch/arm/mach-mxs/include/mach/iomux.h b/arch/arm/mach-mxs/include/mach/iomux.h index 7abdf58..1f31762 100644 --- a/arch/arm/mach-mxs/include/mach/iomux.h +++ b/arch/arm/mach-mxs/include/mach/iomux.h@@ -94,6 +94,9 @@ typedef u32 iomux_cfg_t; /* generic pad control used in most cases */ #define MXS_PAD_CTRL (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL) +/* special pad control used in rare cases */
I'd not talk about "rare cases" in the comment. It applies to most pads, that they are used rarely (at most once per machine :-)
+#define MXS_PAD_CTRL_12MA (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL)
But other than that I fully support this definition. Best regards Uwe -- Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ |