[PATCH] pxa/magician: use gpio arrays for backlight and lcd power init
From: Eric Miao <hidden>
Date: 2011-07-05 07:43:11
On Thu, Apr 21, 2011 at 3:55 AM, Philipp Zabel [off-list ref] wrote:
Use gpio_request_array() / gpio_free_array() in backlight init and exit functions and lcd power initialization. Signed-off-by: Philipp Zabel <redacted>
Applied.
quoted hunk ↗ jump to hunk
--- ?arch/arm/mach-pxa/magician.c | ? 43 ++++++++++++++++------------------------- ?1 files changed, 17 insertions(+), 26 deletions(-)diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 9984ef7..22da1e9 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c@@ -344,22 +344,14 @@ static struct pxafb_mach_info samsung_info = {?* Backlight ?*/ +static struct gpio magician_bl_gpios[] = { + ? ? ? ?{ EGPIO_MAGICIAN_BL_POWER, ?GPIOF_DIR_OUT, "Backlight power" }, + ? ? ? ?{ EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" }, +}; + ?static int magician_backlight_init(struct device *dev) ?{ - ? ? ? int ret; - - ? ? ? ret = gpio_request(EGPIO_MAGICIAN_BL_POWER, "BL_POWER"); - ? ? ? if (ret) - ? ? ? ? ? ? ? goto err; - ? ? ? ret = gpio_request(EGPIO_MAGICIAN_BL_POWER2, "BL_POWER2"); - ? ? ? if (ret) - ? ? ? ? ? ? ? goto err2; - ? ? ? return 0; - -err2: - ? ? ? gpio_free(EGPIO_MAGICIAN_BL_POWER); -err: - ? ? ? return ret; + ? ? ? return gpio_request_array(ARRAY_AND_SIZE(magician_bl_gpios)); ?} ?static int magician_backlight_notify(struct device *dev, int brightness)@@ -376,8 +368,7 @@ static int magician_backlight_notify(struct device *dev, int brightness)?static void magician_backlight_exit(struct device *dev) ?{ - ? ? ? gpio_free(EGPIO_MAGICIAN_BL_POWER); - ? ? ? gpio_free(EGPIO_MAGICIAN_BL_POWER2); + ? ? ? gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios)); ?} ?static struct platform_pwm_backlight_data backlight_data = {@@ -712,6 +703,12 @@ static struct platform_device *devices[] __initdata = {? ? ? ?&leds_gpio, ?}; +static struct gpio magician_lcd_gpios[] = { + ? ? ? { GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" }, + ? ? ? { GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" }, + ? ? ? { GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" } +}; + ?static void __init magician_init(void) ?{ ? ? ? ?void __iomem *cpld;@@ -747,16 +744,10 @@ static void __init magician_init(void)? ? ? ? ? ? ? ?system_rev = board_id & 0x7; ? ? ? ? ? ? ? ?lcd_select = board_id & 0x8; ? ? ? ? ? ? ? ?pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly"); - ? ? ? ? ? ? ? if (lcd_select && (system_rev < 3)) { - ? ? ? ? ? ? ? ? ? ? ? gpio_request(GPIO75_MAGICIAN_SAMSUNG_POWER, "SAMSUNG_POWER"); - ? ? ? ? ? ? ? ? ? ? ? gpio_direction_output(GPIO75_MAGICIAN_SAMSUNG_POWER, 0); - ? ? ? ? ? ? ? } - ? ? ? ? ? ? ? gpio_request(GPIO104_MAGICIAN_LCD_POWER_1, "LCD_POWER_1"); - ? ? ? ? ? ? ? gpio_request(GPIO105_MAGICIAN_LCD_POWER_2, "LCD_POWER_2"); - ? ? ? ? ? ? ? gpio_request(GPIO106_MAGICIAN_LCD_POWER_3, "LCD_POWER_3"); - ? ? ? ? ? ? ? gpio_direction_output(GPIO104_MAGICIAN_LCD_POWER_1, 0); - ? ? ? ? ? ? ? gpio_direction_output(GPIO105_MAGICIAN_LCD_POWER_2, 0); - ? ? ? ? ? ? ? gpio_direction_output(GPIO106_MAGICIAN_LCD_POWER_3, 0); + ? ? ? ? ? ? ? if (lcd_select && (system_rev < 3)) + ? ? ? ? ? ? ? ? ? ? ? gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER, + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?GPIOF_OUT_INIT_LOW, "SAMSUNG_POWER"); + ? ? ? ? ? ? ? gpio_request_array(ARRAY_AND_SIZE(magician_lcd_gpios)); ? ? ? ? ? ? ? ?pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info); ? ? ? ?} else ? ? ? ? ? ? ? ?pr_err("LCD detection: CPLD mapping failed\n"); -- 1.7.4.4