On Tue, Jul 5, 2011 at 2:52 PM, Eric Miao [off-list ref] wrote:

On Fri, Apr 29, 2011 at 4:45 AM, Philip Rakity [off-list ref] wrote:

quoted

Support multiple sd/eMMC interfaces. enable mmc1, 2, and 3.
mmc2 is used eMMC and slot is marked PERMANENT and 8 bit device.
mmc1 is used for Wifi and slot is marked PERMANENT

Note: eMMC (mmc2) is set to initialize first to workaround a problem
where booting in logical order requires mmc create work queue
to be multi-threaded otherwise boot process hangs. ?BUG report
send to linux-mmc and linux-kernel mailing list.

Wifi (mmc1) requires we enable power on the device by toggling
the gpio lines for power and reset.

Signed-off-by: Philip Rakity <redacted>

Applied. Though the email client was fiddling the spaces/CR-LF a bit.

quoted

---
?arch/arm/mach-mmp/brownstone.c | ? 52 +++++++++++++++++++++++++++++++++++++++-
?1 files changed, 51 insertions(+), 1 deletions(-)

Hi, Eric

arch/arm/mach-mmp/brownstone.c has already been modified from
mmc-next, here will have conflict.
Sorry for inconvenience.

Thanks