[PATCH v4 4/7] OMAP2+: PM: idle clkdms only if already in idle
From: Benoit Cousson <hidden>
Date: 2011-07-01 21:27:03
Also in:
linux-omap
Subsystem:
arm port, omap power management support, omap2+ support, the rest · Maintainers:
Russell King, Kevin Hilman, Aaro Koskinen, Andreas Kemnade, Roger Quadros, Tony Lindgren, Linus Torvalds
From: Rajendra Nayak <redacted> The omap_set_pwrdm_state function forces clockdomains to idle, without checking the existing idle state programmed, instead based solely on the HW capability of the clockdomain to support idle. This is wrong and the clockdomains should be idled post a state_switch *only* if idle transitions on the clockdomain were already enabled. Signed-off-by: Rajendra Nayak <redacted> Cc: Paul Walmsley <paul@pwsan.com> --- arch/arm/mach-omap2/pm.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index d48813f..ce1a9f3 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c@@ -108,6 +108,7 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) u32 cur_state; int sleep_switch = -1; int ret = 0; + int hwsup = 0; if (pwrdm == NULL || IS_ERR(pwrdm)) return -EINVAL;
@@ -127,6 +128,7 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) { sleep_switch = LOWPOWERSTATE_SWITCH; } else { + hwsup = clkdm_allows_idle(pwrdm->pwrdm_clkdms[0]); clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); pwrdm_wait_transition(pwrdm); sleep_switch = FORCEWAKEUP_SWITCH;
@@ -142,7 +144,7 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) switch (sleep_switch) { case FORCEWAKEUP_SWITCH: - if (pwrdm->pwrdm_clkdms[0]->flags & CLKDM_CAN_ENABLE_AUTO) + if (hwsup) clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); else clkdm_sleep(pwrdm->pwrdm_clkdms[0]);
--
1.7.0.4