Signed-off-by: Govindraj.R <redacted>
---
 arch/arm/mach-omap2/pm24xx.c                  |    2 ++
 arch/arm/mach-omap2/pm34xx.c                  |    2 ++
 arch/arm/mach-omap2/serial.c                  |   23 +++++++++++++++++++++++
 arch/arm/plat-omap/include/plat/omap-serial.h |    2 ++
 arch/arm/plat-omap/include/plat/serial.h      |    1 +
 drivers/tty/serial/omap-serial.c              |   23 +++++++++++++++++++++++
 6 files changed, 53 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index c405bda..ba58a1d 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c

@@ -137,6 +137,8 @@ static void omap2_enter_full_retention(void)
 			   OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL),
 			   OMAP_SDRC_REGADDR(SDRC_POWER));
 
+	omap_uart_resume_idle();
+
 no_sleep:
 	if (omap2_pm_debug) {
 		unsigned long long tmp;

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index ac7b7f8..3997e92 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c

@@ -216,6 +216,8 @@ static int prcm_clear_mod_irqs(s16 module, u8 regs)
 
 	wkst = omap2_prm_read_mod_reg(module, wkst_off);
 	wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
+
+	c += omap_uart_resume_idle();
 	if (wkst) {
 		iclk = omap2_cm_read_mod_reg(module, iclk_off);
 		fclk = omap2_cm_read_mod_reg(module, fclk_off);

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 6ac078f..4bc5914 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c

@@ -199,6 +199,28 @@ static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
 	}
 }
 
+/* TBD: Will be removed once we have irq-chaing mechanism */

+static bool omap_uart_chk_wakeup(struct platform_device *pdev)
+{
+	struct omap_uart_port_info *up = pdev->dev.platform_data;
+	struct omap_device *od;
+	u32 wkst = 0;
+	bool ret = false;
+
+	od = to_omap_device(pdev);
+	if (omap_hmwod_pad_get_wakeup_status(od->hwmods[0]))
+		ret = true;
+
+	/* Check for normal UART wakeup (and clear it) */
+	wkst = __raw_readl(up->wk_st) & up->wk_mask;
+	if (wkst) {
+		__raw_writel(wkst, up->wk_st);
+		ret = true;
+	}
+
+	return ret;
+}
+
 static void omap_uart_wakeup_enable(struct platform_device *pdev, bool enable)
 {
 	struct omap_uart_port_info *up = pdev->dev.platform_data;

@@ -369,6 +391,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
 	pdata->uartclk = OMAP24XX_BASE_BAUD * 16;
 	pdata->flags = UPF_BOOT_AUTOCONF;
 	pdata->enable_wakeup = omap_uart_wakeup_enable;
+	pdata->chk_wakeup = omap_uart_chk_wakeup;
 	pdata->dma_enabled = info->dma_enabled;
 	pdata->dma_rx_buf_size = info->dma_rx_buf_size;
 	pdata->dma_rx_poll_rate = info->dma_rx_poll_rate;

diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index c5f4dd9..b5117bd 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h

@@ -75,6 +75,7 @@ struct omap_uart_port_info {
 	unsigned int		auto_sus_timeout; /* Auto_suspend timeout */
 
 	void (*enable_wakeup)(struct platform_device *, bool);
+	bool (*chk_wakeup)(struct platform_device *);
 	void __iomem *wk_st;
 	void __iomem *wk_en;
 	u32 wk_mask;

@@ -132,6 +133,7 @@ struct uart_omap_port {
 	unsigned long		port_activity;
 	unsigned int		errata;
 	void (*enable_wakeup)(struct platform_device *, bool);
+	bool (*chk_wakeup)(struct platform_device *);
 };
 
 #endif /* __OMAP_SERIAL_H__ */

diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index ee758d4..44a42aa 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h

@@ -109,6 +109,7 @@ extern void omap_serial_init(void);
 extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
 extern void omap_serial_init_port(struct omap_board_data *bdata,
 		struct omap_uart_port_info *platform_data);
+extern u32 omap_uart_resume_idle(void);
 #endif
 
 #endif

diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 307b7c6..c3561dd 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c

@@ -43,6 +43,7 @@
 #include <plat/dmtimer.h>
 #include <plat/omap-serial.h>
 #include <plat/omap_device.h>
+#include <plat/serial.h>
 
 static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
 

@@ -108,6 +109,27 @@ static inline void serial_omap_port_enable(struct uart_omap_port *up)
 	pm_runtime_get_sync(&up->pdev->dev);
 }
 
+/* TBD: Should be removed once we irq-chaining mechanism in place */
+u32 omap_uart_resume_idle()
+{
+	int i;
+	u32 ret = 0;
+
+	for (i = 0; i < OMAP_MAX_HSUART_PORTS; i++) {
+		struct uart_omap_port *up = ui[i];
+
+		if (!up)
+			continue;
+
+		if (up->chk_wakeup(up->pdev)) {
+			serial_omap_port_enable(up);
+			serial_omap_port_disable(up);
+			ret++;
+		}
+	}
+	return ret;
+}
+
 static void serial_omap_stop_rxdma(struct uart_omap_port *up)
 {
 	if (up->uart_dma.rx_dma_used) {

@@ -1392,6 +1414,7 @@ static int serial_omap_probe(struct platform_device *pdev)
 	up->uart_dma.uart_base = mem->start;
 	up->errata = omap_up_info->errata;
 	up->enable_wakeup = omap_up_info->enable_wakeup;
+	up->chk_wakeup = omap_up_info->chk_wakeup;
 
 	if (omap_up_info->dma_enabled) {
 		up->uart_dma.uart_dma_tx = dma_tx->start;