[PATCH v3 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared
From: Shawn Guo <hidden>
Date: 2011-06-20 10:38:43
Also in:
linux-mmc
Subsystem:
multimedia card (mmc), secure digital (sd) and sdio subsystem, secure digital host controller interface (sdhci) driver, secure digital host controller interface (sdhci) nxp i.mx driver, the rest · Maintainers:
Ulf Hansson, Adrian Hunter, Haibo Chen, Linus Torvalds
The function esdhc_readl_le intends to clear bit SDHCI_CARD_PRESENT, when the card detect gpio tells there is no card. But it does not clear the bit actually. The patch gives a fix on that. Signed-off-by: Shawn Guo <redacted> --- drivers/mmc/host/sdhci-esdhc-imx.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 248b8e5..94097c0 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c@@ -84,7 +84,7 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg) if (boarddata && gpio_is_valid(boarddata->cd_gpio) && gpio_get_value(boarddata->cd_gpio)) /* no card, if a valid gpio says so... */ - val &= SDHCI_CARD_PRESENT; + val &= ~SDHCI_CARD_PRESENT; else /* ... in all other cases assume card is present */ val |= SDHCI_CARD_PRESENT;
--
1.7.4.1