Thread (23 messages) 23 messages, 5 authors, 2011-05-25

[PATCH v2 3/7] mmc: sdhci: make sdhci-of device drivers self registered

From: Anton Vorontsov <hidden>
Date: 2011-05-05 14:23:44
Also in: linux-devicetree, linux-mmc, linuxppc-dev

On Thu, May 05, 2011 at 09:22:54PM +0800, Shawn Guo wrote:
[...]
- * Copyright (c) 2007 Freescale Semiconductor, Inc.
- * Copyright (c) 2009 MontaVista Software, Inc.
- *
- * Authors: Xiaobo Xie [off-list ref]
- *	    Anton Vorontsov [off-list ref]
[...]
-#ifdef CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
-
-/*
- * These accessors are designed for big endian hosts doing I/O to
- * little endian controllers incorporating a 32-bit hardware byte swapper.
- */
-
-u32 sdhci_be32bs_readl(struct sdhci_host *host, int reg)
-{
-	return in_be32(host->ioaddr + reg);
-}
-
-u16 sdhci_be32bs_readw(struct sdhci_host *host, int reg)
-{
-	return in_be16(host->ioaddr + (reg ^ 0x2));
-}
-
-u8 sdhci_be32bs_readb(struct sdhci_host *host, int reg)
-{
-	return in_8(host->ioaddr + (reg ^ 0x3));
-}
-
-void sdhci_be32bs_writel(struct sdhci_host *host, u32 val, int reg)
-{
-	out_be32(host->ioaddr + reg, val);
-}
-
-void sdhci_be32bs_writew(struct sdhci_host *host, u16 val, int reg)
-{
-	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-	int base = reg & ~0x3;
-	int shift = (reg & 0x2) * 8;
-
-	switch (reg) {
-	case SDHCI_TRANSFER_MODE:
-		/*
-		 * Postpone this write, we must do it together with a
-		 * command write that is down below.
-		 */
-		pltfm_host->xfer_mode_shadow = val;
-		return;
-	case SDHCI_COMMAND:
-		sdhci_be32bs_writel(host, val << 16 | pltfm_host->xfer_mode_shadow,
-				    SDHCI_TRANSFER_MODE);
-		return;
-	}
-	clrsetbits_be32(host->ioaddr + base, 0xffff << shift, val << shift);
-}
-
-void sdhci_be32bs_writeb(struct sdhci_host *host, u8 val, int reg)
-{
-	int base = reg & ~0x3;
-	int shift = (reg & 0x3) * 8;
-
-	clrsetbits_be32(host->ioaddr + base , 0xff << shift, val << shift);
-}
-#endif /* CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER */
[...]
+#ifdef CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
+/*
+ * These accessors are designed for big endian hosts doing I/O to
+ * little endian controllers incorporating a 32-bit hardware byte swapper.
+ */
+u32 sdhci_be32bs_readl(struct sdhci_host *host, int reg)
+{
+	return in_be32(host->ioaddr + reg);
+}
+
+u16 sdhci_be32bs_readw(struct sdhci_host *host, int reg)
+{
+	return in_be16(host->ioaddr + (reg ^ 0x2));
+}
+
+u8 sdhci_be32bs_readb(struct sdhci_host *host, int reg)
+{
+	return in_8(host->ioaddr + (reg ^ 0x3));
+}
+
+void sdhci_be32bs_writel(struct sdhci_host *host, u32 val, int reg)
+{
+	out_be32(host->ioaddr + reg, val);
+}
+
+void sdhci_be32bs_writew(struct sdhci_host *host, u16 val, int reg)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	int base = reg & ~0x3;
+	int shift = (reg & 0x2) * 8;
+
+	switch (reg) {
+	case SDHCI_TRANSFER_MODE:
+		/*
+		 * Postpone this write, we must do it together with a
+		 * command write that is down below.
+		 */
+		pltfm_host->xfer_mode_shadow = val;
+		return;
+	case SDHCI_COMMAND:
+		sdhci_be32bs_writel(host, val << 16 | pltfm_host->xfer_mode_shadow,
+				    SDHCI_TRANSFER_MODE);
+		return;
+	}
+	clrsetbits_be32(host->ioaddr + base, 0xffff << shift, val << shift);
+}
+
+void sdhci_be32bs_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+	int base = reg & ~0x3;
+	int shift = (reg & 0x3) * 8;
+
+	clrsetbits_be32(host->ioaddr + base , 0xff << shift, val << shift);
+}
+#endif /* CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER */
I noticed you're very careful wrt copyright/authorship notices,
except for this case. How about retaining copyright stuff when
you merge these two files?

The patch itself looks great though.

Acked-by: Anton Vorontsov <redacted>
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help