[PATCH 0/4] Pinmux subsystem

On Tue, 03 May 2011 19:27:12 +0200, Andrew Lunn said:

I can think of two different solutions: 

1) Three functions: uart-3wire, uart-hw-flow, uart-hw-flow-modem.  The
   first just has 2 pins, the second 4 and the last 8. The board code
   selects one of these for the serial driver to use.

2) Three functions: uart-core, uart-hw-flow, uart-mode.  The first has
   2 pins, the second has 2 pins and the last 4 pins. The board code tells
   the driver to use uart-core, plus say uart-hw-flow.

For this second solution, what happens if some bozo selects *only* uart-modem
but not uart-core?  If there's a strict ordering (hw-flow requires core, modem
requires both hw-flow and core), it's essentially the same thing as the first
solution.  If there's not a strict ordering (i.e you can select uart-modem
without uart-core), you need to come up with sane semantics.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 227 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20110503/ccb5316f/attachment.sig>