[PATCH v2 4/4] omap: musb: introduce default board config
From: Mike Rapoport <hidden>
Date: 2011-04-27 08:56:12
Also in:
linux-omap
Subsystem:
arm port, omap usb support, omap2+ support, the rest · Maintainers:
Russell King, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
Most boards use exactly the same configuration for musb initialization. Create a default that can be shared amount different boards. Signed-off-by: Mike Rapoport <redacted> --- Fixed spelling in $SUBJ, thanks to Felipe Contreras arch/arm/mach-omap2/board-2430sdp.c | 7 +------ arch/arm/mach-omap2/board-3430sdp.c | 8 +------- arch/arm/mach-omap2/board-cm-t35.c | 8 +------- arch/arm/mach-omap2/board-devkit8000.c | 8 +------- arch/arm/mach-omap2/board-igep0020.c | 8 +------- arch/arm/mach-omap2/board-igep0030.c | 8 +------- arch/arm/mach-omap2/board-ldp.c | 8 +------- arch/arm/mach-omap2/board-omap3beagle.c | 8 +------- arch/arm/mach-omap2/board-omap3pandora.c | 8 +------- arch/arm/mach-omap2/board-omap3stalker.c | 8 +------- arch/arm/mach-omap2/board-omap3touchbook.c | 8 +------- arch/arm/mach-omap2/board-overo.c | 8 +------- arch/arm/mach-omap2/board-rm680.c | 8 +------- arch/arm/mach-omap2/board-zoom-peripherals.c | 8 +------- arch/arm/mach-omap2/usb-musb.c | 14 +++++++++++++- 15 files changed, 27 insertions(+), 98 deletions(-)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 99b3f2d..a8810f8 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c@@ -208,11 +208,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; static struct omap_usb_config sdp2430_usb_config __initdata = { .otg = 1, #ifdef CONFIG_USB_GADGET_OMAP
@@ -246,7 +241,7 @@ static void __init omap_2430sdp_init(void) omap2_usbfs_init(&sdp2430_usb_config); omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); board_smc91x_init();
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index b12400e..951e585 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c@@ -810,12 +810,6 @@ static struct flash_partitions sdp_flash_partitions[] = { }, }; -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap_3430sdp_init(void) { int gpio_pendown;
@@ -832,7 +826,7 @@ static void __init omap_3430sdp_init(void) gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1; omap_ads7846_init(1, gpio_pendown, 310, NULL); board_serial_init(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_3430, 0); sdp3430_display_init();
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 1a9e6be..286da17 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c@@ -651,12 +651,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static struct omap_board_config_kernel cm_t35_config[] __initdata = { };
@@ -673,7 +667,7 @@ static void __init cm_t35_init(void) cm_t35_init_led(); cm_t35_init_display(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); }
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index e7dc057..405542a 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c@@ -509,12 +509,6 @@ static struct platform_device *devkit8000_devices[] __initdata = { &omap_dm9000_dev, }; -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
@@ -698,7 +692,7 @@ static void __init devkit8000_init(void) omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions, ARRAY_SIZE(devkit8000_nand_partitions));
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index a0fd10e..2c9a919 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c@@ -559,12 +559,6 @@ static void __init igep2_i2c_init(void) pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); } -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -637,7 +631,7 @@ static void __init igep2_init(void) platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices)); omap_display_init(&igep2_dss_data); omap_serial_init(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); igep2_flash_init();
diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c
index a831e85..512a7eb 100644
--- a/arch/arm/mach-omap2/board-igep0030.c
+++ b/arch/arm/mach-omap2/board-igep0030.c@@ -357,12 +357,6 @@ static int __init igep3_i2c_init(void) return 0; } -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - #if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) static void __init igep3_wifi_bt_init(void)
@@ -424,7 +418,7 @@ static void __init igep3_init(void) igep3_i2c_init(); platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices)); omap_serial_init(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); igep3_flash_init();
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 7482c75..f7d6038 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c@@ -294,12 +294,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static struct mtd_partition ldp_nand_partitions[] = { /* All the partition sizes are listed in terms of NAND block size */ {
@@ -342,7 +336,7 @@ static void __init omap_ldp_init(void) platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); omap_ads7846_init(1, 54, 310, NULL); omap_serial_init(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index ce3bc2d..bc30ab0 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c@@ -551,12 +551,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init beagle_opp_init(void) { int r = 0;
@@ -618,7 +612,7 @@ static void __init omap3_beagle_init(void) /* REVISIT leave DVI powered down until it's needed ... */ gpio_direction_output(170, true); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, ARRAY_SIZE(omap3beagle_nand_partitions));
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index b99cc64..6c22d3f 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c@@ -633,12 +633,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap3pandora_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -652,7 +646,7 @@ static void __init omap3pandora_init(void) ARRAY_SIZE(omap3pandora_spi_board_info)); omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); usbhs_init(&usbhs_bdata); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); gpmc_nand_init(&pandora_nand_data); /* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index a1d550f..9981d06 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c@@ -526,12 +526,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap3_stalker_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
@@ -546,7 +540,7 @@ static void __init omap3_stalker_init(void) omap_display_init(&omap3_stalker_dss_data); omap_serial_init(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index d770802..392278d 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c@@ -421,12 +421,6 @@ static int __init early_touchbook_revision(char *p) } early_param("tbr", early_touchbook_revision); -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap3_touchbook_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -447,7 +441,7 @@ static void __init omap3_touchbook_init(void) /* Touchscreen and accelerometer */ omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions, ARRAY_SIZE(omap3touchbook_nand_partitions));
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 9212442..c7ec7fa 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c@@ -551,12 +551,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init overo_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -565,7 +559,7 @@ static void __init overo_init(void) omap_serial_init(); omap_nand_flash_init(0, overo_nand_partitions, ARRAY_SIZE(overo_nand_partitions)); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); overo_spi_init(); overo_ads7846_init();
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 8e710ff..42d10b1 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c@@ -144,17 +144,11 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data rm680_musb_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_PERIPHERAL, - .power = 100, -}; - static void __init rm680_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); - usb_musb_init(&rm680_musb_data); + usb_musb_init(NULL); rm680_peripherals_init(); }
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index e4870c2..489294a 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c@@ -363,12 +363,6 @@ static int __init omap_i2c_init(void) return 0; } -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void enable_board_wakeup_source(void) { /* T2 interrupt line (keypad) */
@@ -383,7 +377,7 @@ void __init zoom_peripherals_init(void) omap_i2c_init(); platform_device_register(&omap_vwlan_device); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); enable_board_wakeup_source(); omap_serial_init(); }
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 35559f7..dfa5a3c 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c@@ -108,7 +108,13 @@ static void usb_musb_mux_init(struct omap_musb_board_data *board_data) } } -void __init usb_musb_init(struct omap_musb_board_data *board_data) +static struct omap_musb_board_data musb_default_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + +void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) { struct omap_hwmod *oh; struct omap_device *od;
@@ -116,6 +122,12 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data) struct device *dev; int bus_id = -1; const char *oh_name, *name; + struct omap_musb_board_data *board_data; + + if (musb_board_data) + board_data = musb_board_data; + else + board_data = &musb_default_board_data; if (cpu_is_omap3517() || cpu_is_omap3505()) { } else if (cpu_is_omap44xx()) {
--
1.7.3.1