[PATCH 17/17] OMAP2+: VC: support PMICs with separate voltage and command registers
From: Kevin Hilman <hidden>
Date: 2011-03-31 00:16:20
Also in:
linux-omap
Subsystem:
arm port, omap2+ support, the rest · Maintainers:
Russell King, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
The VC layer can support PMICs with separate voltage and command registers by putting the different registers in the PRM_VC_SMPS_VOL_RA and PRCM_VC_SMPS_CMD_RA registers respectively. The PMIC data must supply at least a voltage register address (volt_reg_addr). The command register address (cmd_reg_addr) is optional. If the PMIC data does not supply a separate command register address, the VC will use the voltage register address for both. Signed-off-by: Kevin Hilman <redacted> --- arch/arm/mach-omap2/omap_twl.c | 10 +++++----- arch/arm/mach-omap2/vc.c | 4 ++-- arch/arm/mach-omap2/voltage.h | 3 ++- 3 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index 57c325a..9428b00 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c@@ -158,7 +158,7 @@ static struct omap_volt_pmic_info omap3_mpu_volt_info = { .vp_vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP3_VDD_MPU_SR_CONTROL_REG, + .volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG, .vsel_to_uv = twl4030_vsel_to_uv, .uv_to_vsel = twl4030_uv_to_vsel, };
@@ -178,7 +178,7 @@ static struct omap_volt_pmic_info omap3_core_volt_info = { .vp_vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP3_VDD_CORE_SR_CONTROL_REG, + .volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG, .vsel_to_uv = twl4030_vsel_to_uv, .uv_to_vsel = twl4030_uv_to_vsel, };
@@ -198,7 +198,7 @@ static struct omap_volt_pmic_info omap4_mpu_volt_info = { .vp_vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP4_VDD_MPU_SR_VOLT_REG, + .volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, };
@@ -218,7 +218,7 @@ static struct omap_volt_pmic_info omap4_iva_volt_info = { .vp_vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP4_VDD_IVA_SR_VOLT_REG, + .volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, };
@@ -238,7 +238,7 @@ static struct omap_volt_pmic_info omap4_core_volt_info = { .vp_vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP4_VDD_CORE_SR_VOLT_REG, + .volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, };
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index c513757..ce328c9 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c@@ -106,7 +106,7 @@ int omap_vc_bypass_scale_voltage(struct voltagedomain *voltdm, vc_valid = vc->common->valid; vc_bypass_val_reg = vc->common->bypass_val_reg; vc_bypass_value = (target_vsel << vc->common->data_shift) | - (vdd->pmic_info->pmic_reg << + (vdd->pmic_info->volt_reg_addr << vc->common->regaddr_shift) | (vdd->pmic_info->i2c_slave_addr << vc->common->slaveaddr_shift);
@@ -255,7 +255,7 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) vc_val = vdd->read_reg(vc->common->prm_mod, vc->common->smps_volra_reg); vc_val &= ~vc->smps_volra_mask; - vc_val |= vdd->pmic_info->pmic_reg << vc->smps_volra_shift; + vc_val |= vdd->pmic_info->volt_reg_addr << vc->smps_volra_shift; vdd->write_reg(vc_val, vc->common->prm_mod, vc->common->smps_volra_reg);
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index 71694fe..65c5b81 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h@@ -112,7 +112,8 @@ struct omap_volt_pmic_info { u8 vp_vddmax; u8 vp_timeout_us; u8 i2c_slave_addr; - u8 pmic_reg; + u8 volt_reg_addr; + u8 cmd_reg_addr; unsigned long (*vsel_to_uv) (const u8 vsel); u8 (*uv_to_vsel) (unsigned long uV); };
--
1.7.4