[PATCH V3 6/6] MTD : add GPMI driver in the config and Makefile
From: Huang Shijie <hidden>
Date: 2011-03-30 08:40:13
Subsystem:
memory technology devices (mtd), nand flash subsystem, the rest · Maintainers:
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Linus Torvalds
add the GPMI driver in the relevant Kconfig and Makefile in the MTD. Signed-off-by: Huang Shijie <redacted> --- drivers/mtd/nand/Kconfig | 10 ++++++++++ drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/gpmi-nfc/Makefile | 6 ++++++ 3 files changed, 17 insertions(+), 0 deletions(-) create mode 100644 drivers/mtd/nand/gpmi-nfc/Makefile
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 450afc5..86effe8 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig@@ -426,6 +426,16 @@ config MTD_NAND_NANDSIM The simulator may simulate various NAND flash chips for the MTD nand layer. +config MTD_NAND_GPMI_NFC + bool "GPMI NAND Flash Controller driver" + depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28) + select MTD_PARTITIONS + help + Enables NAND Flash support for IMX23 or IMX28. + The GPMI controller is very powerful, with the help of BCH + module, it can do the hardware ECC. The GPMI supports several + NAND flashs at the same time. + config MTD_NAND_PLATFORM tristate "Support for generic platform NAND driver" help
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 8ad6fae..80d1f08 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile@@ -48,5 +48,6 @@ obj-$(CONFIG_MTD_NAND_BCM_UMI) += bcm_umi_nand.o nand_bcm_umi.o obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o obj-$(CONFIG_MTD_NAND_RICOH) += r852.o obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o +obj-$(CONFIG_MTD_NAND_GPMI_NFC) += gpmi-nfc/ nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/gpmi-nfc/Makefile b/drivers/mtd/nand/gpmi-nfc/Makefile
new file mode 100644
index 0000000..8d91314
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nfc/Makefile@@ -0,0 +1,6 @@ +obj-$(CONFIG_MTD_NAND_GPMI_NFC) += gpmi-nfc.o +gpmi-nfc-objs += gpmi-nfc-main.o +gpmi-nfc-objs += hal-mx23-mx28.o +gpmi-nfc-objs += rom-mx23.o +gpmi-nfc-objs += rom-mx28.o +gpmi-nfc-objs += ../nand_device_info.o
--
1.7.0.4