Dear Uwe,

2011/3/29 Uwe Kleine-K?nig [off-list ref]:

Hello,

On Tue, Mar 29, 2011 at 02:01:10PM +0530, Madhavi Manchala wrote:

quoted

2011/3/29 Uwe Kleine-K?nig [off-list ref]:

quoted

On Tue, Mar 29, 2011 at 12:01:40PM +0530, Madhavi Manchala wrote:

quoted

I have defined a MACHINE_START macro in my board C file as follows.

MACHINE_START(S3C2510, "S3C2510")
? ? ? .init_irq ? ? ? = s3c2510_init_irq,
? ? ? .timer ? ? ? ? ?= &s3c2510_time_init,
MACHINE_END

When I try to compile this C file, I am seeing the following error message.

arch/arm/mach-s3c2510/s3c2510.c:35:1: error: 'MACH_TYPE_S3C2510'
undeclared here (not in a function)

you need a line defining S3C2510 in arch/arm/tools/mach-types.

Yeah. It is there in the arch/arm/tools/mach-types file. I did not add
to it, but it is automatically generated. The few lines from the
arch/arm/tools/mach-types file are as follows.

izarus ? ? ? ? ? ? ? ?MACH_IZARUS ? ? ? ? ? ? IZARUS ? ? ? ? ?573
pxa_rts ? ? ? ? ? ? ? MACH_RTS ? ? ? ? ? ? ? ?RTS ? ? ? ? ? ? ? ? ? ? 574
se5100 ? ? ? ? ? ? ? ?MACH_SE5100 ? ? ? ? ? ? SE5100 ? ? ? ? ?575
s3c2510 ? ? ? ? ? ? ? MACH_S3C2510 ? ?S3C2510 ? ? ? ? 576
csb437tl ? ? ? ? ? ? ?MACH_CSB437TL ? CSB437TL ? ? ? ? ? ? ? ?577
slauson ? ? ? ? ? ? ? MACH_SLAUSON ? ?SLAUSON ? ? ? ? 578
pearlriver ? ? ? ? ? ?MACH_PEARLRIVER PEARLRIVER ? ? ?579
tdc_p210 ? ? ? ? ? ? ?MACH_TDC_P210 ? TDC_P210 ? ? ? ?580

The machine S3C2510 is there in that file.

Do you have

? ? ? ?#include <asm/mach-types.h>

in your machine file?

It is not included in my machine file, previously. Now I included it
in my machine file and I am able to compile the file without any
issues.

Thanks for your valuable information.

Thanks and Regards,
Madhavi M.

Best regards
Uwe

--
Pengutronix e.K. ? ? ? ? ? ? ? ? ? ? ? ? ? | Uwe Kleine-K?nig ? ? ? ? ? ?|
Industrial Linux Solutions ? ? ? ? ? ? ? ? | http://www.pengutronix.de/ ?|