On Wed, Mar 30, 2011 at 03:09:04PM +0200, Arnd Bergmann wrote:

I believe the one thing we really want from this driver is the bus
scan code, which is not present in the amba bus implementation,
as far as I can tell. Today, the amba bus does very little beyond
what the platform bus does, in particular you still need to
register every single device from board specific code.

When the proposed axi_scan() function gets turned into an
amba_bus_register() function, a board file can call that to
add all devices on the bus without listing them individually
and calling amba_device_register() for each one.

Basically everything else is already there in the amba bus,
no need to do it again.

The reason we don't do automatic scanning (which we could on the various
ARM platforms) is because of the platform data necessary to make some of
the primecell drivers work.

Unfortunately, these buses are not as simple as PCI, where a device
typically sits on its own card and is totally self-contained.  With
primecell stuff, there's normally some interdependencies between the
various primecells.

That doesn't stop there being an automatic enumeration layer, but such
a layer would need some way of attaching platform specific data to
specific amba devices.