[PATCH 2/2] ARM: s3c24xx: Switch to common GPIO controlled UDC pullup implementation
From: anarsoul@gmail.com (Vasily Khoruzhick)
Date: 2011-03-07 08:15:40
Also in:
lkml
On Monday 07 March 2011 09:42:00 Lars-Peter Clausen wrote:
Currently all boards using the s3c2410_udc driver use a GPIO to control the state of the pullup, as a result the same code is reimplemented in each board This patch changes these boards to use the common implementation for GPIO controlled pullup in the UDC driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> --- arch/arm/mach-s3c2410/mach-h1940.c | 24 +----------------------- arch/arm/mach-s3c2410/mach-n30.c | 21 +-------------------- arch/arm/mach-s3c2412/mach-smdk2413.c | 24 +----------------------- arch/arm/mach-s3c2440/mach-gta02.c | 22 ++-------------------- arch/arm/mach-s3c2440/mach-mini2440.c | 24 +----------------------- arch/arm/mach-s3c2440/mach-rx1950.c | 21 +-------------------- 6 files changed, 7 insertions(+), 129 deletions(-)
For h1940 and rx1950 parts: Acked-by: Vasily Khoruzhick <anarsoul@gmail.com>