[PATCH] omap3: pm: Use exported set_cr() instead of a custom one.
From: Kevin Hilman <hidden>
Date: 2011-02-15 00:08:10
Also in:
linux-omap
Santosh Shilimkar [off-list ref] writes:
Remove the custom restore_control_register() and use the exported set_cr() instead to set the system control register(SCTRL) value. No functional change. Signed-off-by: Santosh Shilimkar <redacted> Cc: Kevin Hilman <redacted>
Tested/validated on ? Kevin
quoted hunk
--- arch/arm/mach-omap2/pm34xx.c | 7 +------ 1 files changed, 1 insertions(+), 6 deletions(-)diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 2f864e4..63a3e1d 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c@@ -311,11 +311,6 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) return IRQ_HANDLED; } -static void restore_control_register(u32 val) -{ - __asm__ __volatile__ ("mcr p15, 0, %0, c1, c0, 0" : : "r" (val)); -} - /* Function to restore the table entry that was modified for enabling MMU */ static void restore_table_entry(void) {@@ -337,7 +332,7 @@ static void restore_table_entry(void) control_reg_value = __raw_readl(scratchpad_address + OMAP343X_CONTROL_REG_VALUE_OFFSET); /* This will enable caches and prediction */ - restore_control_register(control_reg_value); + set_cr(control_reg_value); } void omap_sram_idle(void)