[PATCH 2/2] ARM: iMX5 BBG: add cpuidle driver parameters

On Tue, Feb 8, 2011 at 6:50 PM, Rob Herring [off-list ref] wrote:

On 02/08/2011 09:51 AM, Yong Shen wrote:

quoted

Hi Arnaud,

I also took a while to think about this before posting patches. I prefer
to put it in board related code since the various PMIC used on each
boards may have influence on cpuidle latency or other charactors,
although it could be minor.

But you are not going to be doing voltage scaling in idle. Is it even
possible to do sleeping operations like accessing a PMIC in idle?

I guess you are asking if modes like 'state retention' are possible for idle
state. so far there is no official mapping between c-states and various arm
idle states, which is something linaro power management group is working on.
Therefore I also treat 'state retention' as a c-state.

ps. remove lpdk in cc list to avoid auto-reply messages.
Yong

The core is powergated, so lowering voltage would not help. Doing bus
scaling or DDR self-refresh are the only likely additional operations.

Rob

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20110209/fe299280/attachment-0001.html>