Hi Shawn,

Shawn Guo writes:

This adds the mmc host driver for Freescale MXS-based SoC i.MX23/28.
The driver calls into mxs-dma via generic dmaengine api for both pio
and data transfer.

Signed-off-by: Shawn Guo <redacted>
---
 arch/arm/mach-mxs/include/mach/mmc.h |   15 +
 drivers/mmc/host/Kconfig             |    9 +
 drivers/mmc/host/Makefile            |    1 +
 drivers/mmc/host/mxs-mmc.c           |  884 ++++++++++++++++++++++++++++++++++
 4 files changed, 909 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-mxs/include/mach/mmc.h
 create mode 100644 drivers/mmc/host/mxs-mmc.c

I've run the mmc-test kernel module with this driver on our TX28
module which fails in the following tests:
|mmc0: Test case 15. Correct xfer_size at write (start failure)...
|mmc0: Result: ERROR (-110)
|mmc0: Test case 16. Correct xfer_size at read (start failure)...
|mmc0: Result: ERROR (-110)
|mmc0: Test case 17. Correct xfer_size at write (midway failure)...
|mmc0: Result: ERROR (-110)
|mmc0: Test case 18. Correct xfer_size at read (midway failure)...
|mmc0: Result: ERROR (-110)

Could you try the test on your hardware?


Best regards,
Lothar Wa?mann
-- 
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstra?e 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Gesch?ftsf?hrer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________