[PATCH v2 09/13] can: pruss CAN driver.

On Fri, Feb 11, 2011 at 08:21:28PM +0530, Subhasish Ghosh wrote:

+config DA8XX_PRU_CANID_MBX0
+	hex "CANID for mailbox 0"
+	depends on CAN_TI_DA8XX_PRU
+	default "0x123"
+	---help---
+	Enter the CANID for mailbox 0
+	Default value is set to 0x123, change this as required.
+
+config DA8XX_PRU_CANID_MBX1
+	hex "CANID for mailbox 1"
+	depends on CAN_TI_DA8XX_PRU
+	default "0x123"
+	 ---help---
+	Enter the CANID for mailbox 1
+	Default value is set to 0x123, change this as required.
+
+config DA8XX_PRU_CANID_MBX2
+	hex "CANID for mailbox 2"
+	depends on CAN_TI_DA8XX_PRU
+	default "0x123"
+	---help---
+	Enter the CANID for mailbox 2
+	Default value is set to 0x123, change this as required.
+
+config DA8XX_PRU_CANID_MBX3
+	hex "CANID for mailbox 3"
+	depends on CAN_TI_DA8XX_PRU
+	default "0x123"
+	---help---
+	Enter the CANID for mailbox 3
+	Default value is set to 0x123, change this as required.
+
+config DA8XX_PRU_CANID_MBX4
+	hex "CANID for mailbox 4"
+	depends on CAN_TI_DA8XX_PRU
+	default "0x123"
+	---help---
+	Enter the CANID for mailbox 4
+	Default value is set to 0x123, change this as required.
+
+config DA8XX_PRU_CANID_MBX5
+	hex "CANID for mailbox 5"
+	depends on CAN_TI_DA8XX_PRU
+	default "0x123"
+	---help---
+	Enter the CANID for mailbox 5
+	Default value is set to 0x123, change this as required.
+
+config DA8XX_PRU_CANID_MBX6
+	hex "CANID for mailbox 6"
+	depends on CAN_TI_DA8XX_PRU
+	default "0x123"
+	---help---
+	Enter the CANID for mailbox 6
+	Default value is set to 0x123, change this as required.
+
+config DA8XX_PRU_CANID_MBX7
+	hex "CANID for mailbox 7"
+	depends on CAN_TI_DA8XX_PRU
+	default "0x123"
+	---help---
+	Enter the CANID for mailbox 7
+	Default value is set to 0x123, change this as required.

Why is filling the mailboxes the job of kernel config?

Regards,
Kurt