[PATCH V2] ARM: S5PV310: Implement kernel timers using MCT

On Tue, Jan 04, 2011 at 11:18:47AM +0900, Kukjin Kim wrote:

From: Changhwan Youn <redacted>

The Multi-Core Timer(MCT) of S5PV310 is designed for implementing
clock source timer and clock event timers. This patch implements
1 clock source timer with 64 bit free running counter of MCT and
2 clock event timers with two of 31-bit tick counters.

I want to wait until after this merge window before commenting too much
on this; some of this patch will be impacted by changes in this merge
window.

+static void s5pv310_frc_suspend(struct clocksource *cs)
+{
+	time_suspended = s5pv310_frc_read(cs);
+};
+
+static void s5pv310_frc_resume(struct clocksource *cs)
+{
+	s5pv310_mct_frc_start((u32)(time_suspended >> 32), (u32)time_suspended);
+};

Is this something which other clocksource drivers need to do, or does the
core automatically deal with the clocksource being irregular across a
suspend/resume event?

+irqreturn_t s5pv310_mct_tick0_isr(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	/*
+	 * This is for supporting oneshot mode.
+	 * Mct would generate interrupt periodically
+	 * without explicit stopping.
+	 */
+	if (evt->mode != CLOCK_EVT_MODE_PERIODIC)
+		s5pv310_mct_tick_stop(MCT_TICK0);
+
+	/* Clear the MCT tick0 interrupt */
+	s5pv310_mct_write(0x1, S5PV310_MCT_L0_INT_CSTAT);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+irqreturn_t s5pv310_mct_tick1_isr(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	/*
+	 * This is for supporting oneshot mode.
+	 * Mct would generate interrupt periodically
+	 * without explicit stopping.
+	 */
+	if (evt->mode != CLOCK_EVT_MODE_PERIODIC)
+		s5pv310_mct_tick_stop(MCT_TICK1);
+
+	/* Clear the MCT tick1 interrupt */
+	s5pv310_mct_write(0x1, S5PV310_MCT_L1_INT_CSTAT);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}

Umm, why not wrap up the clock_event_device into your own structure,
which then carries the base address of the MCT to be used - rather than
duplicating the code just because the base address is different.  Eg,

struct mct_clock_event_device {
	struct clock_event_device evt;
	void __iomem *base;
};