Thread (32 messages) flat view 32 messages, 4 authors, 2011-02-09

[PATCH] ARM: vfp: Fix up exception location in Thumb mode

From: catalin.marinas@arm.com (Catalin Marinas)
Date: 2011-01-15 15:31:08
Also in: lkml

On 14 January 2011 17:30, Russell King - ARM Linux
[off-list ref] wrote:
On Fri, Jan 14, 2011 at 04:58:47PM +0000, Catalin Marinas wrote:
quoted
I agree, this code needs some clean-up. Maybe for Undef we could unify
the ARM and Thumb-2 offsets so that they are both 4 (it may confuse the
breakpoint code, I haven't checked).

Otherwise just let the code handling the undef deal with the ARM/Thumb
difference. For SVC, it makes sense to have different offsets as we
always return to the next instruction.
[...]
When the VFP support code tests the state of the VFP hardware during boot,
it sets the VFP handler to point at vfp_testing_entry, bypassing the normal
VFP handling code, and executes a VFP instruction.

If this VFP instruction faults (eg, because there is no VFP hardware
present or we're not permitted to use it), it could end up resuming
execution in the middle of the 16-bit paired instruction because
regs->ARM_pc points in the middle of it.
Yes, that's possible. We probably never tried a Thumb-2 kernel where
VFP isn't present.
Or maybe we should just make it unconditional that whenever we have an
undefined instruction exception, the regs->ARM_pc value will always be
set for resuming execution after the faulted instruction. ?That makes
it consistent with r2 throughout the code in every case.
I have some comments below.
quoted hunk ↗ jump to hunk
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 2b46fea..5876eec 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -461,27 +461,35 @@ ENDPROC(__irq_usr)
? ? ? ?.align ?5
?__und_usr:
? ? ? ?usr_entry
-
- ? ? ? @
- ? ? ? @ fall through to the emulation code, which returns using r9 if
- ? ? ? @ it has emulated the instruction, or the more conventional lr
- ? ? ? @ if we are to treat this as a real undefined instruction
? ? ? ?@
- ? ? ? @ ?r0 - instruction
+ ? ? ? @ The emulation code returns using r9 if it has emulated the
+ ? ? ? @ instruction, or the more conventional lr if we are to treat
+ ? ? ? @ this as a real undefined instruction
? ? ? ?@
? ? ? ?adr ? ? r9, BSYM(ret_from_exception)
? ? ? ?adr ? ? lr, BSYM(__und_usr_unknown)
+ ? ? ? @
+ ? ? ? @ r2 = regs->ARM_pc, which is either 2 or 4 bytes ahead of the
+ ? ? ? @ faulting instruction depending on Thumb mode.
+ ? ? ? @ r3 = regs->ARM_cpsr
+ ? ? ? @
? ? ? ?tst ? ? r3, #PSR_T_BIT ? ? ? ? ? ? ? ? ?@ Thumb mode?
- ? ? ? itet ? ?eq ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?@ explicit IT needed for the 1f label
+ ? ? ? itttt ? eq ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?@ explicit IT needed for the 1f label
? ? ? ?subeq ? r4, r2, #4 ? ? ? ? ? ? ? ? ? ? ?@ ARM instr at LR - 4
- ? ? ? subne ? r4, r2, #2 ? ? ? ? ? ? ? ? ? ? ?@ Thumb instr at LR - 2
?1: ? ? ldreqt ?r0, [r4]
The itttt above should just be itt. The reveq is conditionally
compiled and beq doesn't necessarily need one.
?#ifdef CONFIG_CPU_ENDIAN_BE8
? ? ? ?reveq ? r0, r0 ? ? ? ? ? ? ? ? ? ? ? ? ?@ little endian instruction
?#endif
+ ? ? ? @
+ ? ? ? @ r0 = 32-bit ARM instruction which caused the exception
+ ? ? ? @ r2 = PC value for the following instruction (:= regs->ARM_pc)
Is r2 here always the PC value following instruction? If the Thumb
instruction was 32-bit, it just points in the middle of the faulting
instruction.
quoted hunk ↗ jump to hunk
+ ? ? ? @ r4 = PC value for the faulting instruction
+ ? ? ? @
? ? ? ?beq ? ? call_fpe
+
? ? ? ?@ Thumb instruction
?#if __LINUX_ARM_ARCH__ >= 7
+ ? ? ? sub ? ? r4, r2, #2 ? ? ? ? ? ? ? ? ? ? ?@ Thumb instr at LR - 2
?2:
?ARM( ?ldrht ? r5, [r4], #2 ? ?)
?THUMB( ? ? ? ?ldrht ? r5, [r4] ? ? ? ?)
@@ -492,18 +500,19 @@ __und_usr:
?3: ? ? ldrht ? r0, [r4]
? ? ? ?add ? ? r2, r2, #2 ? ? ? ? ? ? ? ? ? ? ?@ r2 is PC + 2, make it PC + 4
? ? ? ?orr ? ? r0, r0, r5, lsl #16
+ ? ? ? @
+ ? ? ? @ r0 = the two 16-bit Thumb instructions which caused the exception
+ ? ? ? @ r2 = PC value for the following Thumb instruction (:= regs->ARM_pc+2)
That's correct.
+ ? ? ? @ r4 = PC value for the first 16-bit Thumb instruction
I think r4 here points in the middle of tha faulting instruction for
32-bit Thumb.
quoted hunk ↗ jump to hunk
+ ? ? ? @
?#else
? ? ? ?b ? ? ? __und_usr_unknown
?#endif
- UNWIND(.fnend ? ? ? ? )
+ UNWIND(.fnend)
?ENDPROC(__und_usr)

- ? ? ? @
- ? ? ? @ fallthrough to call_fpe
- ? ? ? @
-
?/*
- * The out of line fixup for the ldrt above.
+ * The out of line fixup for the ldrt instructions above.
?*/
? ? ? ?.pushsection .fixup, "ax"
?4: ? ? mov ? ? pc, r9
@@ -534,11 +543,12 @@ ENDPROC(__und_usr)
?* NEON handler code.
?*
?* Emulators may wish to make use of the following registers:
- * ?r0 ?= instruction opcode.
- * ?r2 ?= PC+4
+ * ?r0 ?= instruction opcode (32-bit ARM or two 16-bit Thumb)
+ * ?r2 ?= PC value to resume execution after successful emulation
?* ?r9 ?= normal "successful" return address
- * ?r10 = this threads thread_info structure.
+ * ?r10 = this threads thread_info structure
?* ?lr ?= unrecognised instruction return address
+ * IRQs disabled, FIQs enabled.
?*/
? ? ? ?@
? ? ? ?@ Fall-through from Thumb-2 __und_usr
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index ee57640..eeb9250 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -347,9 +347,9 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
? ? ? ?void __user *pc;

? ? ? ?/*
- ? ? ? ?* According to the ARM ARM, PC is 2 or 4 bytes ahead,
- ? ? ? ?* depending whether we're in Thumb mode or not.
- ? ? ? ?* Correct this offset.
+ ? ? ? ?* According to the ARM ARM, the PC is 2 or 4 bytes ahead
+ ? ? ? ?* depending on Thumb mode. ?Correct this offset so that
+ ? ? ? ?* regs->ARM_pc points at the faulting instruction.
? ? ? ? */
? ? ? ?regs->ARM_pc -= correction;
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index 4fa9903..2bf6089 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -19,6 +19,14 @@
?#include <asm/vfpmacros.h>
?#include "../kernel/entry-header.S"

+@ VFP entry point.
+@
+@ ?r0 ?= instruction opcode (32-bit ARM or two 16-bit Thumb)
+@ ?r2 ?= PC value to resume execution after successful emulation
+@ ?r9 ?= normal "successful" return address
+@ ?r10 = this threads thread_info structure
+@ ?lr ?= unrecognised instruction return address
+@
?ENTRY(do_vfp)
?#ifdef CONFIG_PREEMPT
? ? ? ?ldr ? ? r4, [r10, #TI_PREEMPT] ?@ get preempt count
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 9897dcf..7292921 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -61,13 +61,13 @@
?@ VFP hardware support entry point.
?@
-@ ?r0 ?= faulted instruction
-@ ?r2 ?= faulted PC+4
-@ ?r9 ?= successful return
+@ ?r0 ?= instruction opcode (32-bit ARM or two 16-bit Thumb)
+@ ?r2 ?= PC value to resume execution after successful emulation
That's right.
quoted hunk ↗ jump to hunk
+@ ?r9 ?= normal "successful" return address
?@ ?r10 = vfp_state union
?@ ?r11 = CPU number
-@ ?lr ?= failure return
-
+@ ?lr ?= unrecognised instruction return address
+@ ?IRQs enabled.
?ENTRY(vfp_support_entry)
? ? ? ?DBGSTR3 "instr %08x pc %08x state %p", r0, r2, r10
@@ -138,9 +138,12 @@ check_for_exception:
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?@ exception before retrying branch
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?@ out before setting an FPEXC that
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?@ stops us reading stuff
- ? ? ? VFPFMXR FPEXC, r1 ? ? ? ? ? ? ? @ restore FPEXC last
- ? ? ? sub ? ? r2, r2, #4
- ? ? ? str ? ? r2, [sp, #S_PC] ? ? ? ? @ retry the instruction
+ ? ? ? VFPFMXR FPEXC, r1 ? ? ? ? ? ? ? @ Restore FPEXC last
+ ? ? ? sub ? ? r2, r2, #4 ? ? ? ? ? ? ?@ Retry current instruction - if Thumb
+ ? ? ? str ? ? r2, [sp, #S_PC] ? ? ? ? @ mode it's two 16-bit instructions,
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? @ else it's one 32-bit instruction, so
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? @ always subtract 4 from the following
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? @ instruction address.
I would say it's always a 32-bit instruction but made up of two 16-bit
values to allow half-word alignment.

-- 
Catalin
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help