[PATCH v2 1/8] ARM: mx5: use config to define boot related addresses
From: Richard Zhao <hidden>
Date: 2010-12-29 08:42:44
On Wed, Dec 29, 2010 at 09:14:19AM +0100, Uwe Kleine-K?nig wrote:
On Wed, Dec 29, 2010 at 03:30:23PM +0800, Richard Zhao wrote:quoted
Signed-off-by: Richard Zhao <redacted> --- Because common clock is change, I don't send out mx50 clock and board level code. But sure I tested the patch series using the clock/board code. arch/arm/mach-mx5/Makefile.boot | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot index 9939a19..388d2e8 100644 --- a/arch/arm/mach-mx5/Makefile.boot +++ b/arch/arm/mach-mx5/Makefile.boot@@ -1,3 +1,3 @@ - zreladdr-y := 0x90008000 -params_phys-y := 0x90000100 -initrd_phys-y := 0x90800000 + zreladdr-$(CONFIG_SOC_IMX51) := 0x90008000 +params_phys-$(CONFIG_SOC_IMX51) := 0x90000100 +initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000I'd prefer to use CONFIG_MACH_MX51 here.
ok Richard
Uwe -- Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ |