[PATCH 2/7] omap3: nand: configurable transfer type per board

-----Original Message-----
From: Tony Lindgren [mailto:tony at atomide.com]
Sent: Saturday, December 18, 2010 5:39 AM
To: Ghorai, Sukumar
Cc: linux-omap at vger.kernel.org; linux-mtd at lists.infradead.org; linux-arm-
kernel at lists.infradead.org
Subject: Re: [PATCH 2/7] omap3: nand: configurable transfer type per board

* Sukumar Ghorai [off-list ref] [101126 07:25]:

quoted

nand transfer type (sDMA, Polled, prefetch) can be select from board

file,

quoted

enabling all transfer type in driver, by default.

this helps in multi-omap build and to select different transfer type for
different board.

Signed-off-by: Sukumar Ghorai <redacted>
---
 arch/arm/plat-omap/include/plat/nand.h |    7 +++
 drivers/mtd/nand/Kconfig               |   17 ------
 drivers/mtd/nand/omap2.c               |   92 +++++++++++--------------

------

quoted

 3 files changed, 40 insertions(+), 76 deletions(-)

diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-

omap/include/plat/nand.h

quoted

index 6562cd0..78c0bdb 100644

--- a/arch/arm/plat-omap/include/plat/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h

@@ -10,6 +10,12 @@

 #include <linux/mtd/partitions.h>

+enum nand_io {
+	NAND_OMAP_PREFETCH_POLLED = 0,	/* prefetch polled mode, default

*/

quoted

+	NAND_OMAP_POLLED,		/* polled mode, without prefetch */
+	NAND_OMAP_PREFETCH_DMA		/* prefetch enabled sDMA mode */
+};
+
 struct omap_nand_platform_data {
 	unsigned int		options;
 	int			cs;

@@ -20,6 +26,7 @@ struct omap_nand_platform_data {
 	int			(*nand_setup)(void);
 	int			(*dev_ready)(struct omap_nand_platform_data *);
 	int			dma_channel;
+	enum nand_io		xfer_type;
 	unsigned long		phys_base;
 	int			devsize;
 };

So maybe the devsize in patch 1/7 should be handled with this too?

[Ghorai] patch 1/7 [1] is to select the NAND type i.e. x8 or x16 NAND; 
So I am keeping as separate patch. And let me know if I am missing anything.
 
[1] https://patchwork.kernel.org/patch/359092/