On 07/13/2010 12:23 AM, Kukjin Kim wrote:

From: Abhilash Kesavan<redacted>

Adds support for the Samsung PATA controller. This driver is based on the
Libata subsystem and references the earlier patches sent for IDE subsystem.

Signed-off-by: Abhilash Kesavan<redacted>
Signed-off-by: Kukjin Kim<redacted>
Cc: Ben Dooks<ben-linux@fluff.org>
Acked-by: Sergei Shtylyov<redacted>
---
Changes since v6:
- Removed check for device 1 in pata_s3c_wait_after_reset() and
   associated changes
- Initialized directly in pata_s3c_remove() and pata_s3c_resume()

  drivers/ata/Kconfig           |    9 +
  drivers/ata/Makefile          |    1 +
  drivers/ata/pata_samsung_cf.c |  683 +++++++++++++++++++++++++++++++++++++++++
  3 files changed, 693 insertions(+), 0 deletions(-)
  create mode 100644 drivers/ata/pata_samsung_cf.c

applied