[PATCH 7/7] mmc: at91_mci: introduce per-mci-revision conditional code
From: Nicolas Ferre <hidden>
Date: 2010-02-26 17:38:33
Also in:
linux-mmc, lkml
Subsystem:
multimedia card (mmc), secure digital (sd) and sdio subsystem, the rest · Maintainers:
Ulf Hansson, Linus Torvalds
We used to manage features and differences on a per-cpu basis. As several cpus share the same mci revision, this patch aggregates cpus that have the same IP revision in one defined constant. We use the at91mci_is_mci1rev2xx() funtion name not to mess with newer Atmel sd/mmc IP called "MCI2". _rev2 naming could have been confusing... Signed-off-by: Nicolas Ferre <redacted> --- drivers/mmc/host/at91_mci.c | 27 +++++++++++++++++++-------- 1 files changed, 19 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index e78cdc8..07fed42 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c@@ -78,6 +78,17 @@ #define DRIVER_NAME "at91_mci" +static inline int at91mci_is_mci1rev2xx(void) +{ + return ( cpu_is_at91sam9260() + || cpu_is_at91sam9263() + || cpu_is_at91cap9() + || cpu_is_at91sam9rl() + || cpu_is_at91sam9g10() + || cpu_is_at91sam9g20() + ); +} + #define FL_SENT_COMMAND (1 << 0) #define FL_SENT_STOP (1 << 1)
@@ -204,8 +215,8 @@ static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data size = data->blksz * data->blocks; len = data->sg_len; - /* AT91SAM926[0/3] Data Write Operation and number of bytes erratum */ - if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) + /* MCI1 rev2xx Data Write Operation and number of bytes erratum */ + if (at91mci_is_mci1rev2xx()) if (host->total_length == 12) memset(dmabuf, 0, 12);
@@ -398,7 +409,7 @@ static void at91_mci_enable(struct at91mci_host *host) at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC); mr = AT91_MCI_PDCMODE | 0x34a; - if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) + if (at91mci_is_mci1rev2xx()) mr |= AT91_MCI_RDPROOF | AT91_MCI_WRPROOF; at91_mci_write(host, AT91_MCI_MR, mr);
@@ -555,10 +566,10 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command */ host->total_length = block_length * blocks; /* - * AT91SAM926[0/3] Data Write Operation and + * MCI1 rev2xx Data Write Operation and * number of bytes erratum */ - if (cpu_is_at91sam9260 () || cpu_is_at91sam9263()) + if (at91mci_is_mci1rev2xx()) if (host->total_length < 12) host->total_length = 12;
@@ -943,7 +954,7 @@ static int __init at91_mci_probe(struct platform_device *pdev) host->bus_mode = 0; host->board = pdev->dev.platform_data; if (host->board->wire4) { - if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) + if (at91mci_is_mci1rev2xx()) mmc->caps |= MMC_CAP_4_BIT_DATA; else dev_warn(&pdev->dev, "4 wire bus mode not supported"
@@ -959,8 +970,8 @@ static int __init at91_mci_probe(struct platform_device *pdev) } /* Add SDIO capability when available */ - if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) { - /* AT91SAM9260/9263 erratum */ + if (at91mci_is_mci1rev2xx()) { + /* at91mci MCI1 rev2xx sdio interrupt erratum */ if (host->board->wire4 || !host->board->slot_b) mmc->caps |= MMC_CAP_SDIO_IRQ; }
--
1.5.6.5