IXP4xx: Indirect PCI MMIO compile failure

Krzysztof Halasa [off-list ref] writes:

There is 1:1 mapping on IXP4xx with indirect PCI MMIO:

static inline void __iomem *
__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned int mtype)
{
        if((addr < PCIBIOS_MIN_MEM) || (addr > 0x4fffffff))
                return __arm_ioremap(addr, size, mtype);

        return (void __iomem *)addr;
        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Well, the 128 MB limit of indirect MMIO addressing seems to be bogus.
I can't find anything about it in the Intel's manual (except that PCI
address space is 0x48000000-0x4FFFFFFF and 0x48000000-0x4BFFFFFF is
actually usable - in direct mode). Added a patch:

--- a/arch/arm/mach-ixp4xx/include/mach/hardware.h
+++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h

@@ -18,7 +18,11 @@
 #define __ASM_ARCH_HARDWARE_H__
 
 #define PCIBIOS_MIN_IO		0x00001000
-#define PCIBIOS_MIN_MEM		(cpu_is_ixp43x() ? 0x40000000 : 0x48000000)
+#ifdef CONFIG_IXP4XX_INDIRECT_PCI
+#define PCIBIOS_MIN_MEM		0x10000000
+#else
+#define PCIBIOS_MIN_MEM		0x48000000
+#endif
 
 /*
  * We override the standard dma-mask routines for bouncing.

And:
# lspci -v
00:0d.0 RAID bus controller: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Se
rial ATA Controller (rev 01)
        Subsystem: Silicon Image, Inc. SiI 3512 SATARaid Controller
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 29
        I/O ports at 1010 [size=8]
        I/O ports at 1020 [size=4]
        I/O ports at 1018 [size=8]
        I/O ports at 1024 [size=4]
        I/O ports at 1000 [size=16]
        Memory at 10080000 (32-bit, non-prefetchable) [size=512]
                  ^^^^^^^^
        [virtual] Expansion ROM at 10000000 [disabled] [size=512K]

Needless to say, it works.
-- 
Krzysztof Halasa