Sascha Hauer wrote:

On Mon, Oct 19, 2009 at 06:41:13PM +0200, Valentin Longchamp wrote:

quoted

Hi Guennadi,

Guennadi Liakhovetski wrote:

quoted

Hi

On Thu, 15 Oct 2009, Valentin Longchamp wrote:

quoted

We have two mt9t031 cameras that have a muxed bus on the robot.
We can control which one we are using with gpio outputs. This
currently is not optimal

So, what prevents you from registering two platform devices for your 
two cameras? Is there a problem with that?

The lack of time until now to do it properly. I sent those patches as  
initial RFC (and by the way thanks for your comment).

I would like to have one video interface only and that I can switch  
between the two physical camera using a quite simple system call. Would  
that be compatible with registering the two platform devices ?

Wouldn't it be better to have /dev/video[01] for two cameras? How do
keep the registers synchron between both cameras otherwise?

Well, from my experimentations, most initializations are done when you 
open the device. So if you close the device, switch camera and open it 
again, the registers are initialized with the need values. Of course 
there is a problem is you switch camera while the device is open.

It could be ok with /dev/video[01], but I would need something that 
would prevent one device to be opened when the other already is open (a 
mutex, but where ?).

Besides, I have read a slide from Dongsoo Kim 
(http://www.celinuxforum.org/CelfPubWiki/ELC2009Presentations?action=AttachFile&do=get&target=Framework_for_digital_camera_in_linux-in_detail.ppt 
slides 41-47) and the cleanest solution would be to have the two chips 
enumerated with VIDIOC_ENUMINPUT as proposed. What would then be the 
v4l2 call to switch from one device to each other ? How to "link" it 
with the kernel code that make the real hardware switching ?

Thanks for your inputs.

Val

-- 
Valentin Longchamp, PhD Student, EPFL-STI-LSRO1
valentin.longchamp at epfl.ch, Phone: +41216937827
http://people.epfl.ch/valentin.longchamp
MEA3485, Station 9, CH-1015 Lausanne