Hi Chanwoo,

2015-03-13 1:09 GMT+01:00 Chanwoo Choi [off-list ref]:

Hi Maxime,

On 03/13/2015 06:55 AM, Maxime Coquelin wrote:

quoted

From: Maxime Coquelin <mcoquelin.stm32@gmail.com>

This adds documentation of device tree bindings for the
STM32 reset controller.

Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
 .../devicetree/bindings/reset/st,stm32-rcc.txt     | 102 +++++++++++++++++++++
 1 file changed, 102 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/st,stm32-rcc.txt

diff --git a/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
new file mode 100644
index 0000000..962f961
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt

<snip>

quoted

+ - can1: 281
+ - can2: 282
+ - pwr: 284
+ - dac: 285
+ - uart7: 286
+ - uart8: 287
+ - tim1: 288
+ - tim8: 289
+ - usart1: 292
+ - usart6: 293
+ - adc: 296
+ - sdio: 299
+ - spi1: 300
+ - spi4: 301
+ - syscfg: 302
+ - tim9: 304
+ - tim10: 305
+ - tim11: 306
+ - spi5: 308
+ - spi6: 309
+ - sai1: 310
+ - ltdc: 31
+

Last line is un-necessary. When I applied this patch for test
"new blank line at EOF" happen.

Thanks, that will be fixed in v4.

Kind regards,
Maxime