On Tue, Oct 27, 2026 at 11:43:04AM -0700, Dave Jiang wrote:
I built a proof of concept on your wip_attestation_all_1 branch with help of LLM
for TDX Connect device attestation to see how it holds up, and wanted to share
what I found.
Nice!
What I built:
- A ctlv-attestation-spdm family. As you proposed, the sysfs lock creates the
assigned-TDI attestation instance; in my version unlock removes it.
EVIDENCE_GET, EVIDENCE_ACCEPT, DEVSEC_STATE_GET and DEVSEC_RUN all go through
your ops.
- A provider (a 'struct attestation_provider') that sits on top of PCI/TSM, so
any backend can use it. It serves the evidence PCI/TSM already publishes, and
asks the backend for a refresh when EVIDENCE_GET carries a challenge.
I ran it in QEMU with the devsec sample TSM, and in a TDX Connect guest on real
hardware with a real device. Both worked: lock, EVIDENCE_GET, DEVSEC_RUN
refusing a device without a verdict, RUN, and unlock. My tree has out of tree
code for TDX Connect to get things working.
The model works well for device attestation. A few things came up that I think
worth a look.
1. EVIDENCE_ACCEPT and DEVSEC_RUN take any evidence generation since the last
device change (attestation_evidence_validate()). Ranges would narrow that,
but they need measurement registers (attestation_ranges_required()), and a
device has none. So a verdict survives a refresh. In QEMU with the devsec
sample:
EVIDENCE_GET, empty challenge -> evidence generation 1
EVIDENCE_GET, challenge c1 -> generation 2, measurements changed
EVIDENCE_ACCEPT generation 1 -> ok
EVIDENCE_GET, challenge c2 -> generation 3, measurements changed
DEVSEC_RUN generation 1 -> ok, device in RUN
Any process that can issue EVIDENCE_GET can do this between the appraisal and
DEVSEC_RUN, and the device runs on evidence nobody looked at.
We don't care about freshness of measurements. What we care about is
that the device has remained continuously locked while we are doing
this.
Generation should not have anything to do with the # of evidence
collected, it should be tied to the lock event. We do a lock and we
get a generation number. That number remains fixed and could be passed
into run as a minor sanity check.
However the real security work is in the kernel driver which is
required to actively detect/prevent any host tampering with LOCKED.
RMM does this with a trio of sequences counters maintained by the
kernel driver: lock_seq, meas_seq, report_seq
If the host tampers with things then the sequences computed by the
driver will not match those computed by the RMM and it will fail.
So, I don't care if we lock the device and then collect three
evidences for some reason. It is not the APIs problem to make sure
they are all the same, or that the one used for attestation is
"freshest".
While locked the device is not supposed to change its measurements,
allowing that turns locked into complete security nonsense. How do you
know when the measurements stop changing to actually measure it?
The only point here is to collect some evidence that represents the
start time of a continuous period of exclusive guest control.
Have I got this wrong somehow?
2. TDX Connect (maybe others) does not raise an event when a device drops out of
RUN. The provider only finds out when it asks, and on TDX even that answer
can lag. The guest reads the state the TDX Module last saw in a TDISP
response. A function level reset, for example, moves a locked TDI to ERROR,
but the guest keeps reading CONFIG_LOCKED until the TDX Module sees another
TDISP response, such as when the host asks the device for its state.
Yeah, I bet this is common.
Could the core add a version of attestation_state_changed() that a provider
can call while the op already holds the lock? Or let the provider flag the
change, and have the core send the notification once the op drops the lock?
Sounds right to me
3. Jason asked on 14/20 whether anyone needs a variable-length challenge. I
don't think devices need a range. A plain read sends an empty challenge, and
an SPDM GET_MEASUREMENTS nonce is "NL = 32 or 0". Your TDX provider always
takes 64 (attestation_tdx_evidence_caps).
A device needs exactly two lengths: 0 for a plain read and 32 for a refresh.
struct attestation_evidence_caps only holds a single min/max range. It's
checked on every request in attestation_evidence_request_decode(), and any
range that allows both 0 and 32 also allows everything in between.
To work around that, my provider declares 0-64 and PCI/TSM rejects any length
other than the backend's nonce size, 32 for both backends I ran. Could the
caps give one exact challenge length instead of a range, plus a flag that
also allows an empty challenge? A device provider would set 32 with the flag,
and your TDX provider 64 without it.
I'd expect to be able to learn the exact nonce sice that the challenge
can support. It should probably be a list not a range, then you could
include 0 for SPDM..
And maybe other lens if we do crypto agility here or something.
The challenge is formed into the returned token so it is a kind of
ABI and we don't want things like transparent 0 pad or something, so
userspace does have to know..
4. EVIDENCE_GET rejects any buffer smaller than max_length
(attestation_evidence_decode_objects()), so userspace has to allocate for the
worst case. Aneesh's provider declares 16M per certificate chain, so every
read needs a 16M buffer. Could EVIDENCE_GET take a smaller buffer and return
the length it needs, or offer a way to ask for the size?
Makes sense, this is also where someday having the memfd as an option
might be nice since it could be dynamicaly sized by the kernel
5. evidence.challenge is a required attr of evidence-request, so a plain read
has to send an empty one ("hex:" in Aneesh's example). Could it be optional?
I'm a bit puzzled by this optional challenge concept, I haven't tried
to read SPDM spec yet, but it really has a way to omit the challenge
from the reply? It doesn't just replace it with 0 or something?
6. tdx_attestation_test's discovery_and_construction_fields expects an
inheritance chain of 4, but the TDX family inherits ctlv-attestation
directly, which gives 3. In a real TDX guest it fails with
"Expected 4 (4) == ctlv_chain_len(self->dev) (3)".
I would have naively guessed this should inherent from some SPDM family?
Jaon