On 9/29/23 02:37, John Garry wrote:

+.BR RWF_ATOMIC " (since Linux 6.7)"
+Allows block-based filesystems to indicate that write operations will be issued
+with torn-write protection. Torn-write protection means that for a power or any
+other hardware failure, all or none of the data from the write will be stored,
+but never a mix of old and new data. This flag is meaningful only for
+.BR pwritev2 (),
+and its effect applies only to the data range written by the system call.
+The total write length must be power-of-2 and must be sized between
+stx_atomic_write_unit_min and stx_atomic_write_unit_max, both inclusive. The
+write must be at a natural offset within the file with respect to the total
+write length. Torn-write protection only works with
+.B O_DIRECT
+flag, i.e. buffered writes are not supported. To guarantee consistency from
+the write between a file's in-core state with the storage device,

It seems wrong to me to start the first sentence with "Allows". Atomic
behavior should be mandatory if RWF_ATOMIC has been set.

Additionally, shouldn't it be documented what value will be stored in
errno if the atomic write has been rejected?

Thanks,

Bart.