ptrace: Remove the unnecessary arguments from arch_ptrace_stop

Started by Eric W. Biederman on Sep 24, 2021

Subsystems (3)

Maintainers (4)

DORMANTno replies

open the first message on its own page

Message details and related content
Both arch_ptrace_stop_needed and arch_ptrace_stop are called with an
exit_code and a siginfo structure.  Neither argument is used by any of
the implementations so just remove the unneeded arguments.

The two arechitectures that implement arch_ptrace_stop are ia64 and
sparc.  Both architectures flush their register stacks before a
ptrace_stack so that all of the register information can be accessed
by debuggers.

As the question of if a register stack needs to be flushed is
independent of why ptrace is stopping not needing arguments make sense.

Cc: David Miller <davem@davemloft.net>
Cc: <redacted>
Signed-off-by: "Eric W. Biederman" <redacted>
---

Resent because my little one distracted me as I was sending this last
night and I did not manage to copy the sparc and ia64 folks.

 arch/ia64/include/asm/ptrace.h  |  4 ++--
 arch/sparc/include/asm/ptrace.h |  8 ++++----
 include/linux/ptrace.h          | 22 +++++++++-------------
 kernel/signal.c                 |  4 ++--
 4 files changed, 17 insertions(+), 21 deletions(-)
diff --git a/arch/ia64/include/asm/ptrace.h b/arch/ia64/include/asm/ptrace.h
index 08179135905c..f15504f75f10 100644
--- a/arch/ia64/include/asm/ptrace.h
+++ b/arch/ia64/include/asm/ptrace.h
@@ -129,9 +129,9 @@ static inline long regs_return_value(struct pt_regs *regs)
   extern void ia64_decrement_ip (struct pt_regs *pt);
 
   extern void ia64_ptrace_stop(void);
-  #define arch_ptrace_stop(code, info) \
+  #define arch_ptrace_stop() \
 	ia64_ptrace_stop()
-  #define arch_ptrace_stop_needed(code, info) \
+  #define arch_ptrace_stop_needed() \
 	(!test_thread_flag(TIF_RESTORE_RSE))
 
   extern void ptrace_attach_sync_user_rbs (struct task_struct *);
diff --git a/arch/sparc/include/asm/ptrace.h b/arch/sparc/include/asm/ptrace.h
index 71dd82b43cc5..d1419e669027 100644
--- a/arch/sparc/include/asm/ptrace.h
+++ b/arch/sparc/include/asm/ptrace.h
@@ -26,12 +26,12 @@ static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
 	return (regs->tstate &= ~TSTATE_SYSCALL);
 }
 
-#define arch_ptrace_stop_needed(exit_code, info) \
+#define arch_ptrace_stop_needed() \
 ({	flush_user_windows(); \
 	get_thread_wsaved() != 0; \
 })
 
-#define arch_ptrace_stop(exit_code, info) \
+#define arch_ptrace_stop() \
 	synchronize_user_stack()
 
 #define current_pt_regs() \
@@ -129,12 +129,12 @@ static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
 	return (regs->psr &= ~PSR_SYSCALL);
 }
 
-#define arch_ptrace_stop_needed(exit_code, info) \
+#define arch_ptrace_stop_needed() \
 ({	flush_user_windows(); \
 	current_thread_info()->w_saved != 0;	\
 })
 
-#define arch_ptrace_stop(exit_code, info) \
+#define arch_ptrace_stop() \
 	synchronize_user_stack()
 
 #define current_pt_regs() \
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index b5ebf6c01292..8aee2945ff08 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -362,29 +362,25 @@ static inline void user_single_step_report(struct pt_regs *regs)
 #ifndef arch_ptrace_stop_needed
 /**
  * arch_ptrace_stop_needed - Decide whether arch_ptrace_stop() should be called
- * @code:	current->exit_code value ptrace will stop with
- * @info:	siginfo_t pointer (or %NULL) for signal ptrace will stop with
  *
  * This is called with the siglock held, to decide whether or not it's
- * necessary to release the siglock and call arch_ptrace_stop() with the
- * same @code and @info arguments.  It can be defined to a constant if
- * arch_ptrace_stop() is never required, or always is.  On machines where
- * this makes sense, it should be defined to a quick test to optimize out
- * calling arch_ptrace_stop() when it would be superfluous.  For example,
- * if the thread has not been back to user mode since the last stop, the
- * thread state might indicate that nothing needs to be done.
+ * necessary to release the siglock and call arch_ptrace_stop().  It can be
+ * defined to a constant if arch_ptrace_stop() is never required, or always
+ * is.  On machines where this makes sense, it should be defined to a quick
+ * test to optimize out calling arch_ptrace_stop() when it would be
+ * superfluous.  For example, if the thread has not been back to user mode
+ * since the last stop, the thread state might indicate that nothing needs
+ * to be done.
  *
  * This is guaranteed to be invoked once before a task stops for ptrace and
  * may include arch-specific operations necessary prior to a ptrace stop.
  */
-#define arch_ptrace_stop_needed(code, info)	(0)
+#define arch_ptrace_stop_needed()	(0)
 #endif
 
 #ifndef arch_ptrace_stop
 /**
  * arch_ptrace_stop - Do machine-specific work before stopping for ptrace
- * @code:	current->exit_code value ptrace will stop with
- * @info:	siginfo_t pointer (or %NULL) for signal ptrace will stop with
  *
  * This is called with no locks held when arch_ptrace_stop_needed() has
  * just returned nonzero.  It is allowed to block, e.g. for user memory
@@ -394,7 +390,7 @@ static inline void user_single_step_report(struct pt_regs *regs)
  * we only do it when the arch requires it for this particular stop, as
  * indicated by arch_ptrace_stop_needed().
  */
-#define arch_ptrace_stop(code, info)		do { } while (0)
+#define arch_ptrace_stop()		do { } while (0)
 #endif
 
 #ifndef current_pt_regs
diff --git a/kernel/signal.c b/kernel/signal.c
index 9f2dc9cf3208..c9759ff2cb43 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2200,7 +2200,7 @@ static void ptrace_stop(int exit_code, int why, int clear_code, kernel_siginfo_t
 {
 	bool gstop_done = false;
 
-	if (arch_ptrace_stop_needed(exit_code, info)) {
+	if (arch_ptrace_stop_needed()) {
 		/*
 		 * The arch code has something special to do before a
 		 * ptrace stop.  This is allowed to block, e.g. for faults
@@ -2210,7 +2210,7 @@ static void ptrace_stop(int exit_code, int why, int clear_code, kernel_siginfo_t
 		 * any signal bookkeeping like checking group_stop_count.
 		 */
 		spin_unlock_irq(&current->sighand->siglock);
-		arch_ptrace_stop(exit_code, info);
+		arch_ptrace_stop();
 		spin_lock_irq(&current->sighand->siglock);
 	}
 
-- 
2.20.1
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help