Re: [PATCH] epoll: add exclusive wakeups flag

Hi Jason,

On 03/15/2016 11:35 AM, Jason Baron wrote:

Hi Michael,

On 03/14/2016 05:03 PM, Michael Kerrisk (man-pages) wrote:

quoted

Hi Jason,

On 03/15/2016 09:01 AM, Michael Kerrisk (man-pages) wrote:

quoted

Hi Jason,

On 03/15/2016 08:32 AM, Jason Baron wrote:

quoted

On 03/14/2016 01:47 PM, Michael Kerrisk (man-pages) wrote:

quoted

[Restoring CC, which I see I accidentally dropped, one iteration back.]

[...]

quoted

quoted

quoted

Returning to the second sentence in this description:

              When a wakeup event occurs and multiple epoll file descrip‐
              tors are attached to the same target file using EPOLLEXCLU‐
              SIVE, one or  more  of  the  epoll  file  descriptors  will
              receive  an  event with epoll_wait(2).

There is a point that is unclear to me: what does "target file" refer to?
Is it an open file description (aka open file table entry) or an inode?
I suspect the former, but it was not clear in your original text.

So from epoll's perspective, the wakeups are associated with a 'wait
queue'. So if the open() and subsequent EPOLL_CTL_ADD (which is done via
file->poll()) results in adding to the same 'wait queue' then we will
get 'exclusive' wakeup behavior.

So in general, I think the answer here is that its associated with the
inode (I coudn't say with 100% certainty without really looking at all
file->poll() implementations). Certainly, with the 'FIFO' example below,
the two scenarios will have the same behavior with respect to
EPOLLEXCLUSIVE.

So, I was actually a little surprised by this, and went away and tested
this point. It appears to me that that the two scenarios described below
do NOT have the same behavior with respect to EPOLLEXCLUSIVE. See below.

quoted

So, in both scenarios, *one or more* processes will get a wakeup?
(I'll try to add something to the text to clarify the detail we're 
discussing.)

quoted

Also, the 'non-exclusive' mode would be subject to the same question of
which wait queue is the epfd is associated with...

I'm not sure of the point you are trying to make here?

Cheers,

Michael

quoted

quoted

To make this point even clearer, here are two scenarios I'm thinking of.
In each case, we're talking of monitoring the read end of a FIFO.

===

Scenario 1:

We have three processes each of which
1. Creates an epoll instance
2. Opens the read end of the FIFO
3. Adds the read end of the FIFO to the epoll instance, specifying
   EPOLLEXCLUSIVE

When input becomes available on the FIFO, how many processes
get a wakeup?

When I test this scenario, all three processes get a wakeup.

quoted

quoted

quoted

===

Scenario 3

A parent process opens the read end of a FIFO and then calls
fork() three times to create three children. Each child then:

1. Creates an epoll instance
2. Adds the read end of the FIFO to the epoll instance, specifying
EPOLLEXCLUSIVE

When input becomes available on the FIFO, how many processes
get a wakeup?

When I test this scenario, one process gets a wakeup.

In other words, "target file" appears to mean open file description
(aka open file table entry), not inode.

This is actually what I suspected might be the case, but now I am
puzzled. Given what I've discovered and what you suggest are the
semantics, is the implementation correct? (I suspect that it is,
but it is at odds with your statement above. My test programs are
inline below.

Cheers,

Michael

Thanks for the test cases. So in your first test case, you are exiting
immediately after the epoll_wait() returns. So this is actually causing
the next wakeup. 

Can I just check my understanding of the rationale for the preceding 
point. The next process is getting woken up, because the previous process
did not "consume" the event (that is, the input is still available on the 
FIFO). Right?

And then the 2nd thread returns from epoll_wait() and
this causes the 3rd wakeup.

I added the sleep() calls, but still things don't seem to happen
quite as you suggest. In the first scenario, after the first process
terminates, *all* of the remaining processes wake from epoll_wait().
What's happening in this case? (This smells like a possible bug.)

In the second scenario (fork()), after the first process terminates
(without consuming the FIFO input), all of the other processes remain 
blocked in epoll-wait(). (Note, I extended the test program here
to allow the number of child processes to be specified as a command-line
argument.) I think I can make sense of that: it's because the open 
file descriptor for the read end of the FIFO has been duplicated
in all of the child processes, and closing the FD in one child
does not cause the corresponding open file description in other
processes to be torn down because there are other FDs that still
refer to it.

So the wakeups are actually not happening from the write directly, but
instead from the readers doing a close(). If you do some sort of sleep
after the epoll_wait() you can confirm the behavior. So I believe this
is working as expected.

As note above, I'm still slightly puzzled.
Revised test programs pasted below.

Cheers,

Michael

==========

/* t_EPOLLEXCLUSIVE_multiopen.c

  Licensed under GNU GPLv2 or later.
*/

#include <sys/epoll.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/types.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>

#define errExit(msg)    do { perror(msg); exit(EXIT_FAILURE); \
                        } while (0)

#define usageErr(msg, progName) \
                        do { fprintf(stderr, "Usage: "); \
                             fprintf(stderr, msg, progName); \
                             exit(EXIT_FAILURE); } while (0)

#ifndef EPOLLEXCLUSIVE
#define EPOLLEXCLUSIVE (1 << 28)
#endif

int
main(int argc, char *argv[])
{
    int fd, epfd, nready;
    struct epoll_event ev, rev;

    if (argc != 2 || strcmp(argv[1], "--help") == 0)
        usageErr("%s <FIFO>\n", argv[0]);

    epfd = epoll_create(2);
    if (epfd == -1)
        errExit("epoll_create");

    fd = open(argv[1], O_RDONLY);
    if (fd == -1)
        errExit("open");
    printf("Opened %s\n", argv[1]);

    ev.events = EPOLLIN | EPOLLEXCLUSIVE;
    if (epoll_ctl(epfd, EPOLL_CTL_ADD, fd, &ev) == -1)
        errExit("epoll_ctl");

    nready = epoll_wait(epfd, &rev, 1, -1);
    if (nready == -1)
        errExit("epoll-wait");
    printf("epoll_wait() returned %d\n", nready);

    printf("sleeping\n");
    sleep(3);
    printf("Terminating\n");
    exit(EXIT_SUCCESS);
}

===================

/* t_EPOLLEXCLUSIVE_fork.c 
 
  Licensed under GNU GPLv2 or later.
*/

#include <sys/epoll.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>

#define errExit(msg)    do { perror(msg); exit(EXIT_FAILURE); \
                        } while (0)

#define usageErr(msg, progName) \
                        do { fprintf(stderr, "Usage: "); \
                             fprintf(stderr, msg, progName); \
                             exit(EXIT_FAILURE); } while (0)

#ifndef EPOLLEXCLUSIVE
#define EPOLLEXCLUSIVE (1 << 28)
#endif

int
main(int argc, char *argv[])
{
    int fd, epfd, nready;
    struct epoll_event ev, rev;
    int cnum, cmax;

    if (argc < 2 || strcmp(argv[1], "--help") == 0)
        usageErr("%s <FIFO> [num-children]\n", argv[0]);

    fd = open(argv[1], O_RDONLY);
    if (fd == -1)
        errExit("open");
    printf("Opened %s\n", argv[1]);

    cmax = (argc > 2) ? atoi(argv[2]) : 3;

    for (cnum = 0; cnum < cmax; cnum++) {
        switch (fork()) {
        case -1:
            errExit("fork");

        case 0: /* Child */
            epfd = epoll_create(2);
            if (epfd == -1)
                errExit("epoll_create");

            ev.events = EPOLLIN | EPOLLEXCLUSIVE;
            if (epoll_ctl(epfd, EPOLL_CTL_ADD, fd, &ev) == -1)
                errExit("epoll_ctl");

            nready = epoll_wait(epfd, &rev, 1, -1);
            if (nready == -1)
                errExit("epoll-wait");
            printf("Child %d: epoll_wait() returned %d\n", cnum, nready);
            printf("sleeping\n");
            sleep(3);
            printf("Child %d terminating\n", cnum);
            exit(EXIT_SUCCESS);

        default:
            break;
        }
    }

    for (cnum = 0; cnum < cmax; cnum++)
        wait(NULL);

    exit(EXIT_SUCCESS);
}